4D Programming Cable

(1) 4 out of 5 stars Report bug

Part No :
INT-2184
Availability:
Out of Stock
Shipping :
Same Day*
Weight:
0.05Kg
Made By:
4D Systems
Mfr.Part.No:
4D Programming Cable
Quality Rank:
100/100
Warranty:
1 Month

Rs 2499

(Excluding GST.)

Rs 2949

(Including GST)

Buy & earn 250 reward points
GST Invoice & Input Credit Available

Description: The 4D Programming Cable is a USB to Serial-TTL UART converter cable. It incorporates the Silabs CP2102 USB to Serial UART bridge IC (as used in the uUSB-MB5 module) which handles all the USB signaling and protocols. The cable provides a fast and simple way to connect all of the 4D devices that require TTL level serial interface to USB. The Programming Cable is also an essential hardware tool used for programming PmmC files and 4DGL user code downloads into the GOLDELOX, PICASO and DIABLO processors embedded in many 4D modules.

The cable contains a small internal electronic circuit board, utilising the CP2102 chip and special RESET circuitry, which is encapsulated into the USB connector at the end of the cable. The cable is RoHS compliant and is available with a 5pin female header (0.1"/2.54mm pitch) at TTL levels of 3.3V for RX and TX. The 5pin header is labeled with the appropriate signal names: +5V, RX, TX, GND, RESET which match the programming headers on the 4D devices. The cable also provides +5V DC supply to power up the target device. The cable is 1.8m in length and the circuitry is USB powered (USB 2.0 compliant full speed @ 12Mbps) and supports data rates from 300bps to 1Mbps.

Note: The TX and RX signal levels are between 0.0 Volts and 3.3 Volts.

Features:

USB 2.0 compliant Full Speed 12Mbps maximum speed.
Hardware or Xon/Xoff handshaking supported; 300bps to 1Mbps.
UART supports 5-8 bit data, 1-2 Stop bits, odd/even and no parity.
Integrated EEPROM for Vendor ID, product ID, serial number, release number.
Virtual COM port drivers allow operation with existing COM port PC applications.
Supports Windows, MAC (OSX-9 and above) and Linux (2.4 kernel and above).
USB powered; -40 to +85 deg C temp range.
Small size; circuitry built inside the USB connector.
RoHS compliant.

Applications:

Interface micro-controller UART to USB
USB to RS-232 converters
USB to RS-422/RS-485 converters
Upgrade legacy RS232 devices
Make PDA and cellphone USB interface cables
Serial Interface for barcode readers, POS terminals, etc.

Dimensions:

Length: 1m

Package Includes:

1 x 4D Programming Cable

Documents & Downloads:

Sort by: Recently / Helpful

Must have accessory

By Nareesh from Jharkhand, India on May 05, 2016

Every one interfacing a 4D systems display should have this accessory with them.
Its a good & reliable product.
Only negative is its high cost.

Was this review helpful to you? Yes No

There are currently no any question about this product.

Request price match for the 4D Programming Cable

Found this item with same quality and at a lower price but prefer to buy from rhydoLABZ.com?

Please submit the url of the better price you saw. We will lauch an immediate investigation and try our best to beat the price, if it proves to be the same product. We will notify you the result by email. Thanks a lot for helping us to maintain competitive prices.