Stock Clearance Sale
-44 %
Model: DEV-3362
Brand: Sparkfun - USA
The IOIO-OTG (pronounced “yo-yo-O-T-G”) is a development board specially designed, features a PIC microcontroller which acts like a bridge that connects an app on your PC or Android device to low-level peripherals like GPIO, PWM, ADC, I2C, SPI, and UART. An app-level library helps you write control ..
Rs 1,999.00 Rs 3,599.00
Stock Clearance Sale
-64 %
Model: WRL-3754
A very small single chip FM receiver module found in many portable media players. Based on the AR1010 IC from Airoha, the FM receiver uses a simple command set over an I2C or SPI interface. Crystal and supporting components are all on board, all you need to attach is an antenna.
Features:
..
Rs 39.00 Rs 109.00
-56 %
Model: WRL-3753
This antenna is best suited for GSM applications providing better signal strength. PCB Antenna is a wireless device to receive and transmit signals, has been widely used in telecommunication system.
Specifications:
Very Small Size
Frequency Range: 890-960 / 1850-1990 Mhz
Gain(dB): 2dB
..
Rs 39.00 Rs 89.00
Stock Clearance Sale
-40 %
Model: DIS-3361
This 1.3 inch OLED Display is an OLED monochrome 128×64 dot matrix display module with I2C Interface. It is perfect when you need an ultra-small display. Comparing to LCD, OLED screens are way more competitive, which has a number of advantages such as high brightness, self-emission, high contr..
Rs 239.00 Rs 399.00
Stock Clearance Sale
-29 %
Out Of Stock
Model: PRO-2731
Brand: Waveshare
The STLINK-V3MINI is stand-alone debugging and programming mini probe for STM32 microcontrollers. The JTAG/SWD interfaces are used to communicate with any STM32 microcontroller located on an application board.The STLINK-V3MINI also provides a Virtual COM port interface allowing the host PC to commun..
Rs 1,499.00 Rs 2,099.00
Stock Clearance Sale
-64 %
Model: DEV-3361
Brand: Sparkfun - USA
The SparkFun Artemis Development Kit is the latest board to be released around the SparkFun Artemis Module and it allows access to more software development features than previous Artemis based boards. Recommended software used to program the Artemis DK are the Arduino IDE, Arm® Mbed™ OS (Studio and..
Rs 1,299.00 Rs 3,649.00
-35 %
Model: INT-3032
Brand: Sparkfun - USA
Do you have too many sensors with the same I2C address? Put them on the SparkFun Qwiic Mux Breakout to get them all talking on the same bus! The Qwiic Mux Breakout enables communication with multiple I2C devices that have the same address that makes it simple to interface with. The Qwiic Mux also ha..
Rs 649.00 Rs 999.00
Stock Clearance Sale
-74 %
Out Of Stock
Model: DIS-3372
Brand: Waveshare
This is an NFC-powered 1.54inch e-Paper Module, with 200x200 resolution. Users can transmit data from smartphone or NFC reader to e-Paper and refresh by NFC.
Features:
No backlight required, e-Paper keep displaying the last content for a long time without power
No power adapter required
..
Rs 699.00 Rs 2,699.00
Stock Clearance Sale
-74 %
Out Of Stock
Model: DIS-3373
Brand: Waveshare
This is an NFC-powered 1.54inch e-Paper Module, with 200x200 resolution. Users can transmit data from smartphone or NFC reader to e-Paper and refresh by NFC.
Features:
No backlight required, e-Paper keep displaying the last content for a long time without power
No power adapter required
..
Rs 699.00 Rs 2,699.00
-29 %
Model: RAS-3404
The perfect Raspberry Pi 4 Case that keeps your Pi cool even at maximum performance. Provides access to the Camera module, Display Module, GPIO pins, and PoE pins. Small formed cooling case that especially keeps the Raspberry Pi 4 safe.
Provides access to the Camera module, Display Module, GPIO pin..
Rs 999.00 Rs 1,399.00
-38 %
Model: RAS-3412
This binocular stereo vision expansion board is specially designed for Raspberry Pi Compute Module, compatible with CM3 / CM3 Lite / CM3+ / CM3+ Lite. It features three camera ports and commonly used ports like DSI and USB, more other peripheral interfaces are also supported through the FPC connecto..
Rs 2,499.00 Rs 3,999.00
-43 %
Model: RAS-3413
This camera cable is specifically designed to work with the Raspberry Pi Zero V1.3 specific
Specification:
For use with:
Raspberry Pi Zero V1.3 specific
Dimension: 150.0mm x 16.0mm x 0.2mm
Package Includes:
1 x RPi Zero V1.3 Camera Cable 15cm..
Rs 199.00 Rs 349.00
-30 %
Model: RAS-3407
Brand: Waveshare
This super ICE Tower CPU Cooling Fan for Raspberry Pi is born for solving heat dissipation problem!
Tower structure, 5mm copper tube, multi-layer heat sinks, 7 blades powerful fan, all the above combinations make this super radiator for Raspberry Pi. In the case of overclocking, it can reduce the..
Rs 1,399.00 Rs 1,999.00
-26 %
Model: RAS-3408
A Decent Aluminum Case for Raspberry Pi 4, with Safe Power Button. The fan and power button can only work with the driver. You can directly refer to the manual which comes with the case.
Features:
Raspberry Pi 4 Applicable, Make A Shiny Mini-Computer By This Decent Aluminium-Alloy Case Cus..
Rs 1,999.00 Rs 2,699.00
-16 %
Model: RAS-3403
Brand: Waveshare
This is a 2-Channel CAN bus expansion HAT designed for Raspberry Pi, supports CAN2.0, features multi onboard protection circuits, high anti-interference capability, and stable operation. It suits for fields such as automotive devices or industrial automation.CAN module could process packets transmit..
Rs 1,899.00 Rs 2,249.00