Description : The USB A to Micro B Cable with good silicon insulating material and high-quality connector can be used to Charge or sync Micro USB devices from a standard USB port on a desktop or mobile computer.
This Cable is ideal for close-range connections such as charging a car..
The Texas Instruments TPS2113A autoswitching power multiplexer allows you to switch seamlessly between two power sources of 2.8 V to 5.5 V while blocking reverse current into either source. The power multiplexer (or mux) has an adjustable current limit that can be set as high as 2 A and an adjustabl..
SparkFun LiPo Charger Basic - Micro-USB is used to charge charge LiPo batteries. The SparkFun LiPo Charger charge 3.7V LiPo cells at a rate of 500mA. It is designed to charge single-cell Li-Ion or Li-Polymer batteries. The board incorporates a charging circuit, status LED, connector for your battery..
Description: The Stick Series quick start boards from rhydoLABZ are primarily intended to be used as a development system for 64-pin ARM Controllers (LPC2129/38/48), which can also be used as stand-alone devices. Over the last few years, the ARM architecture has become the most pervasive 32-bit..
Description: The Stick Series quick start boards from rhydoLABZ are primarily intended to be used as a development system for 64-pin ARM Controllers (LPC2129/38/48), which can also be used as stand-alone devices. Over the last few years, the ARM architecture has become the most pervasive 32-bit..
Description: This here is your standard A-microB USB cable, for USB 2.0. Perfect for connecting a PC to your NETduino, Arduino Leonardo, Raspberry Pi (among other things).
Features:
Works with USB 2.0
Available in standard Black color
Length: 1.2 Mtr
Package Includes:
1 ..
Micro USB Type-B Female (SMD) also known as micro-B, this new, smaller USB connector to be used primarily on small hand held device where space is a premium (think cell phones).
The micro USB connector is roughly half the height of the mini USB connector allowing for thinner devices to have..
The microUSB Programming Adapter (uUSB-PA5) is a USB to Serial-TTL UART bridge converter which is simple, cost effective, very small and easy to use.It uses a mini-B type USB connector to connect to your PC and is based on the FTDI FT232RQ USB to Serial Bridge IC from FTDI Chip.
It provides t..
Description:The Pololu A-Star 32U4 Micro is a general-purpose programmable module based on Atmel’s ATmega32U4 AVR microcontroller, which has 32 KB of flash program memory, 2.5 KB of RAM, and built-in USB functionality. Onboard features of the A-Star (abbreviated A*) include a 16 MHz resonator, a USB..
This standard A-microB USB cable for USB 2.0. Perfect for connecting a PC to your Raspberry Pi. Approximately 1m long from end to end, its a little more compact than other classic long cable.
Features:
Light and compact
Works with USB 2.0Perfect for connecting a PC to Raspberry Pi
Ap..
Description: This here is your standard A-microB USB cable, for USB 2.0. Perfect for connecting a PC to your NETduino, Arduino Leonardo, Raspberry Pi (among other things). Approximately 140cm long from end to end, its a little more compact than other classic long cable.
Features:
Work..
Introducing the 3.3V SparkFun
FT231X Breakout board, complete with the full UART hardware handshake
feature! The pinout of this board matches the FTDI cable to work with
official Arduino and cloned 3.3V Arduino boards. It can also be used for
general serial applications. This board still bri..
Description: The pcDuino AV Kit from Sparkfun includes everything you need to get your LinkSprite pcDuino powered, networked and connected to an HDMI enabled TV or monitor. If you don’t happen to have all of these cables laying around, this is the easiest way to get up and running with your pcDuino...
The mbed Microcontroller is an ARM processor, a comprehensive set of peripherals and a USB programming and communication interface provided in a small and practical DIP package. The mbed is a super-easy-to-use rapid prototyping tool built on industry standard technology.
The mbed Microcontroller ..
Description: The Embedded C Kit is a Teach yourself Kit based on Microchip's PIC16F877A microcontroller with Embedded C programming Language, suitable for teaching and learning embedded system programming in High level Language. This tutorial is intended to give a detailed picture of Installing and ..