This board breaks out the VBUS, GND, D-, D+ and ID pins of a USB Mini-B connector. The VBUS and GND pins can be used to power your project from USB, while the D- and D+ pins give you access to the USB differential data signals. Each of these pins, along with the ID pin, are broken out into a 1×5 row of 0.1″-spaced pins on the board. The included 1×5 straight male header can be soldered to these pins to allow the board to be used with perfboards, solderless breadboards, and 0.1″ connectors.
This tiny unit measures only 0.52″ × 0.85″ (0.55″ × 0.85″ including its USB Mini-B connector) and has four 0.086″ diameter mounting holes for #2 or M2 screws.
- Size: 0.55″ × 0.85″ × 0.23″
- 1x USB Mini-B Connector Breakout Board
- 1x 5Pin straight male header
There are currently no any reviews about this product.
There are currently no any question about this product.