2.66 Inch E-Paper E-Ink Display Module (B) - Waveshare

(0) 0 out of 5 stars Write reviewReport bug
  • Part No :
  • DIS-3392
  • Availability:
  • In Stock
  • Shipping :
  • Same Day*
  • Weight:
  • 0.8Kg
  • Made By:
  • Waveshare
  • Mfr.Part.No:
  • 18915
  • Quality Rank:
  • 95/100
Rs 1309
(Excluding GST.)
Rs 1545
(Including GST)
1545 rhydoLABZ.com New In Stock
  • Buy & earn 131  reward points
  • GST Invoice & Input Credit Available
Quantity :


2.66 Inch E-Paper E-Ink display module (B), 296×152 pixels, red / black / white three-color, SPI interface, Low power, wide viewing angle, paper-like displaying without electricity, ideal for price tags, shelf labels, industrial instruments.

Features:

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
  • Onboard voltage translator, compatible with 3.3V / 5V MCUs
  • Comes with development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Specifications:

  • Operating Voltage:3.3V/5V         
  • Interface:3-wire SPI, 4-wire SPI 
  • Outline Dimensions:37.0 × 83.5mm         
  • Display Size:30.704 × 60.088mm               
  • Dot pitch:0.202 × 0.203mm         
  • Resolution:296 × 152 pixels        
  • Display Color: Red, Black, White
  • Grey SCale:2
  • Full Refresh Time: 15S
  • Refresh Power:16mw(typ.)
  • Standby Current <0.01uA (almost none)
  • Viewing angle >170°



Advantages of E-Ink:

  • E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
  • E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.


Onboard SPI Control Interface:

  • For Connecting With Controller Boards Like Raspberry Pi/Jetson Nano/Arduino/STM32

  • VCC:3.3V/5V
  • GND:Ground
  • DIN:SPI MOSI pin
  • CLK:SPI SCK pin
  • CS:SPI chip selection, low active
  • DC:Data / Command selection (high for data, low for command)
  • RST:External reset, low active
  • BUSY:Busy status output, high active

Onboard Voltage Translator:

  • Compatible With 3.3V / 5V MCUs

Application Examples:

  • Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags

Outline Dimensions:

Package Includes:

  • 1x 2.66 Inch e-Paper Module
  • 1x PH2.0 20cm 8 Pin

Documents/Downloads:

Sort by: Recently  /  Helpful Write review

There are currently no any reviews about this product.

There are currently no any question about this product.

Ask a question about 2.66 Inch E-Paper E-Ink Display Module (B) - Waveshare

Report issue about the 2.66 Inch E-Paper E-Ink Display Module (B) - Waveshare



Ask a question about the 2.66 Inch E-Paper E-Ink Display Module (B) - Waveshare

Report issue about the 2.66 Inch E-Paper E-Ink Display Module (B) - Waveshare



Request price match for the 2.66 Inch E-Paper E-Ink Display Module (B) - Waveshare

Found this item with same quality and at a lower price but prefer to buy from rhydoLABZ.com?

Please submit the url of the better price you saw. We will lauch an immediate investigation and try our best to beat the price, if it proves to be the same product. We will notify you the result by email. Thanks a lot for helping us to maintain competitive prices.

2.66 Inch E-Paper E-Ink Display Module (B) - Waveshare