- 240×135, General 1.14inch LCD Display Module, IPS, 65K RGB
- embedded ST7789 driver, using SPI bus
- Comes with examples for Raspberry Pi, Arduino, STM32, etc

Features at a glance:
- 240×135 resolution, 65K RGB colors, clear and colorful displaying effect
- SPI interface, minimizes required IO pins, supports controller boards like Raspberry Pi/Arduino/STM32
- Comes with development resources (examples for Raspberry Pi/Arduino/STM32)
Specifications:
- Operating voltage - 3.3V/5V
- Resolution - 240 × 135 pixels
- Communication Interface - 4-wire SPI
- Display size - 24.91 × 14.86mm
- Display Panel - IPS
- Pixel size - 0.1101 × 0.1035mm
- Driver - ST7789
- Dimensions - 35.00 × 32.00mm
Controlled via SPI Bus
Supports controller boards like Raspberry Pi/Arduino/STM32

- VCC : Power (3.3V/5V input)
- GND : Ground
- DIN : SPI data input
- CLK : SPI clock input
- CS : Chip selection, low active
- DC : Data/Command selection (high for data, low for command)
- RST : Reset, low active
- BL : Backlight
Hardware connection
connecting with Raspberry Pi

Connecting with Arduino board

Living Example

Outline Dimensions

Package Includes:
- 1.14inch LCD Module x1
- PH2.0 8PIN 20cm cable x1
Downloads:
Note: The 0.96inch OLED consists of 1/4 yellow upper section and 3/4 blue lower section, not a regular dual-color display.
There are currently no any reviews about this product.
There are currently no any question about this product.