Description: Atmel's AT91RM9200 SoC (System-on-chip) is built around the 200 MIPS ARM920T ARM Thumb processor with integrated 16K-byte instruction and 16K-byte data cache memories. It incorporates a rich set of system and application peripherals and standard interfaces in order to provide a single-chip solution for a wide range of applications that require maximum functionality at minimum power consumption at lowest cost. It features an ETM (Embedded Trace Macrocell) and an enhanced ARM architecture 4v MMU and supports various memories including SDRAM, Static Memory, Burst Flash, CompactFlash, SmartMedia and NAND Flash integrated with a wide range of standard interfaces containing serial interfaces, Ethernet MAC interface, USB2.0 Full Speed Host and Device ports, I2S, I2C, SPI, etc. To complete the offer this SoC benefits from many debug features including JTAG-ICE, a dedicate UART debug channel (DBGU) and an embedded run-time trace.
Embest ATEB9200 Evaluation Board is based on Atmel's AT91RM9200 ARM9 microcontroller running at 180MHz. The board itself is provided with plenty of example programs. It is a complete Linux development environment that includes all the necessary hardware and software to allow embedded engineers to achieve fast result and reap the benefit of the open source software. Due to the extensive on-chip functions, CPU-intensive applications requiring low power consumption can be realized at low cost. Typical applications are POS (Point-of sale), medical system and industrial automation requiring Ethernet and USB. Users can fully take use of it for evaluation, development and applications.
Specifications:Evaluation Platform Based on AT91RM9200 ARM920T Microcontroller
USB Host/Device, Ethernet, SD/MMC, CF, SM, JTAG,RS232, RS485,…
A Complete Linux Development System
Hardware:
Dimensions: 180x180mm
Working temperature: -45~85 Celsius
Processor : AT91RM9200 based on 16/32-bit ARM920T core microcontrollers
Power input : DC 5.0V
2M parallel flash memory
32M SDRAM (support 64M for option)
8M data flash
2 USB Host Port and 1 USB Device Port
2 serial ports with 1 simple interface and 1 all connected interface which could connect to RS232 MODEM
1 RS485 interface
1 SPI interface could connect CAN module
1 EEPROM connected to the Two-wire Interface (TWI)
1 10/100M Ethernet interface module
AC97 module
SD/MMC interface
CF interface
SM interface
I/O ports all extended via sockets
Embedded Trace Microcell (ETM) interface
20pin standard JTAG interface
Software Examples:
Plenty of software examples are provided for this ATEB9200 evaluation board, all in source code:
Basic_test (basic demonstration program)
BasicIdle_test (processor run mode demonstration program)
EMAC_test (Ethernet MAC demonstration program)
MCIDevice_test (EBI (External Bus Interface) demonstration program )
MMU_test (Memory Management Units demonstration program)
public_test (public source code file)
ROM_BootLoader_test (ROM Bootloader demonstration program)
ROM_Services_test
UHP_test (USB demonstration program)
USARTPDC_test (serial interfaces demonstration program)
SPI_test (SPI demonstration program)
TWIEeprom_test (TWI demonstration program)
Kit Includes:
ATEB9200 board
Software examples
Documents (User manual, circuit schematic drawing, Datasheet,footprint)
Related development tools
ATMEL related material (the materials from Atmel CD-ROM)
Linux source code, compiled Linux kernel and file system
Uboot source code and compiled Uboot kernel
Linux cross-compiling tool
Tftp server tool
Configuration files for Embest Emulator flash program
1 Cross line Serial cable
1 Cross Ethernet cable
1 USB cable
5V/1A power supply
Documents:
There are currently no any reviews about this product.
There are currently no any question about this product.
