LPC2148 ARM Header Board - rhydoLABZ

(1) 5 out of 5 stars Report bug

Part No :
HEA-1103
Availability:
Out of Stock
Shipping :
Same Day*
Weight:
0.1Kg
Made By:
rhydoLABZ
Mfr.Part.No:
HEA-1103
Quality Rank:
100/100
Warranty:
3 Month

Rs 1799

(Excluding GST.)

Rs 2123

(Including GST)

Buy & earn 180 reward points
GST Invoice & Input Credit Available

Qty Discount Price (Excl.GST)
1	Rs 1799
2-4	Rs 1709
5-9	Rs 1673
10+	Rs 1619

Description: The LPC2148 ARM Header Board is a Low Cost Board that can be used to quickly evaluate and demonstrate the capabilities of NXP LPC2148 (ARM7TDMI) microcontroller. The Header board is designed as DIP package with access to all Port pins for external connection.The LPC2148 ARM Header Board consists all basic components required to function the microcontroller. The board is populated with voltage regulators ,RTC crystal ,Main Crystal and necessary de-coupling capacitors. Simply give 5V to the header , it will starts to execute your code!

LPC2148 ARM Header Board Features:

Easy to use DIP Package
Includes NXP LPC2148 Microcontroller with onchip USB Peripheral
On Board Power LED Indicator
On Board JTAG Jumper
On Board 12 MHz Crystal Oscillator
On Board 32.768 KHz Crystal for RTC
On Board 3.3V Regulator
On Board Power Supply de-Coupling Capacitors
All Port Pins available at Berge Strip

LPC2148 Chip Specification:

NXP LPC2148 with 12 MHz Crystal Oscillator (With Boot loader Software)
High Performance 32-bit ARM7TDMI-S™ CPU
512 KB Programmable Flash Memory provides minimum of 10,000 erase/write cycles and 10 years of data-retention.
32 KB Data Memory (SRAM)
In-System Programming/In-Application Programming (ISP/IAP) via on-chip boot loader software.
Single Flash sector or full chip erase in 400 ms and programming of 256 bytes in 1 ms.
Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on- chip RealMonitor software and high-speed tracing of instruction execution.
USB 2.0 Full-speed compliant device controller with 2 KB of endpoint RAM.
Provides 8KB of on-chip RAM accessible to USB by DMA
Two 10-bit ADCs provide a total of 14 analog inputs, with conversion times as low as 2.44 us per channel.
Single 10-bit DAC provides variable analog output.
Two 32-bit Timers/External event counters.
Four Capture and four Compare channels.
PWM unit with six output pins.
Low power Real-time clock with independent power and dedicated 32 kHz clock input.
Multiple serial interfaces including two UARTs, two Fast I2C (400 kbit/s), SPI™ and SSP with buffering and variable data length capabilities.
Vectored interrupt controller with configurable priorities and vector addresses.
Up to 45 of 5 V tolerant general purpose I/O pins.
Up to nine edge or level sensitive external interrupt pins.
60 MHz maximum CPU clock available from programmable on-chip Phase-Locked Loop (PLL) with settling time of 100us.
On-chip integrated oscillator operates with external crystal in range of 1 MHz to 25 MHz
Power saving modes include Idle and Power-down.
Individual enable/disable of peripheral functions.
Processor wake-up from Power-down mode via external interrupt.
Single power supply chip with Power-On Reset (POR) and Brown-Out Detection (BOD:
CPU Operating Voltage range of 3.0 V to 3.6 V

Package includes:

1x LPC2148 ARM Header Board

Downloads:

Schematic
Datasheets
- LD1117
- LPC2148

Sort by: Recently / Helpful

By Chirag Prajapati from N/A on November 23, 2014

I purchased this last week. I need schematics. the link shown above is not working.

2 of 4 people found this review helpful

Was this review helpful to you? Yes No

- Q
- How to burn the code in it?
  asked by Akhil Pillai on March 29, 2016
- A
- You can use a CP2102 Basic or FTDI Basic to connect the header board to PC. Connect the RESET pin of header to the DTR pin of the basic breakout, the Port 0 UART pins (P0.0 & P0.1) of the header with the RX and TX pins of the breakout and the ISP Pin (P0.14) to ground. Now the connections are all set, connect your basic breakout to your PC and you can load the hex code using the Flash Utility Tool or Flash Magic on Windows and LPC2K_PGM on Linux
  
  rhydoLABZ 'ARM LPC2148 USB Development Board' houses the same LPC2148 Header board. It is a complete development package for the LPC2148
- Q
- Is there a battery in the header board for the RTC(Vbat)
  asked by Bravish Babu on January 01, 2018
- A
- No, there is no battery in the LPC2148 ARM Header Board. But in the mini board of LPC2148, battery is available,

Request price match for the LPC2148 ARM Header Board - rhydoLABZ

Found this item with same quality and at a lower price but prefer to buy from rhydoLABZ.com?

Please submit the url of the better price you saw. We will lauch an immediate investigation and try our best to beat the price, if it proves to be the same product. We will notify you the result by email. Thanks a lot for helping us to maintain competitive prices.