LPC2129 ARM Header Board - rhydoLABZ

(1) 5 out of 5 stars Report bug

Part No :
HEA-1105
Availability:
Out of Stock
Shipping :
Same Day*
Weight:
0.1Kg
Made By:
rhydoLABZ
Mfr.Part.No:
HEA-1105
Quality Rank:
100/100
Warranty:
3 Month

Rs 3499

(Excluding GST.)

Rs 4129

(Including GST)

Buy & earn 350 reward points
GST Invoice & Input Credit Available

Qty Discount Price (Excl.GST)
1	Rs 3499
2-4	Rs 3324
5-9	Rs 3254
10+	Rs 3149

Description: The LPC2129 ARM Header Board is a Low Cost Board that can be used to quickly evaluate and demonstrate the capabilities of NXP LPC2129 (ARM7TDMI) microcontroller. The Header board is designed as DIP package with access to all Port pins for external connection.The LPC2129 ARM Header Board consists all basic components required to function the microcontroller. The board is populated with voltage regulators ,RTC crystal ,Main Crystal and necessary de-coupling capacitors. Simply give 5V to the header , it will starts to execute your code!

Header Board Features:

Easy to use DIP Package
Includes NXP LPC 2129 Microcontroller
On Board Power LED Indicator
On Board JTAG Jumper
On Board 10 MHz Crystal Oscillator
On Board 32.768 KHz Crystal for RTC
On Board 3.3V Regulator
On Board 1.8V Regulator
On Board Power Supply de-Coupling Capacitors
All Port Pins available at Berge Strip

LPC 2129 Chip Specification:

NXP LPC 2129 with 10 MHz Crystal Oscillator (With Boot loader Software)
High Performance 32-bit ARM7TDMI-S™ CPU
256 KB Programmable Flash Memory provides a minimum of 100,000 erase/write cycles and 20 years of data retention.
16 KB Data Memory (SRAM)
In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software.
Flash programming takes 1 ms per 512 byte line. Single sector or full chip erase takes 400ms.
EmbeddedICE-RT interface enables breakpoints and watch points.
Two interconnected CAN interfaces with advanced acceptance filters
Four channel 10-bit A/D converter with conversion time as low as 2.44 us.
Multiple serial interfaces including two UARTs , Fast I2C (400 kbits/s) and two SPIs
60MHz maximum CPU clock available from programmable on-chip Phase-Locked Loop
Vectored Interrupt Controller with configurable priorities
Two 32-bit Timers.
Four Capture and four Compare channels.
PWM unit with six output pins.
Real-time clock.
Watch Dog Timer
Up to forty-six 5V tolerant general purpose I/O pins.
Up to nine edge or level sensitive external interrupt pins.
On-chip crystal oscillator with an operating range of 1MHz to 30MHz.
Two low power modes - Idle and Power-down.
Processor wake-up from Power-down mode via external interrupt.
Individual enable/disable of peripheral functions for power optimization.
CPU operating voltage range of 1.65V to 1.95V and I/O power supply range of 3.0V to 3.6V

Package includes:

1x LPC2129 ARM Header Board

Downloads:

Schematic
Datasheets
- LPC2129
- LD1117

Sort by: Recently / Helpful

Nice Product

By Digambar from Gujarat, India on April 20, 2016

We have been using this product since a long time, not just one but a few batches of it. This one is really good.

4 of 6 people found this review helpful

Was this review helpful to you? Yes No

- Q
- what is the pclk?
  asked by nibu mathew on November 10, 2016
- A
- ARM7 LPC2129 Microcontroller needs two clocks; one is for its peripherals and other for its CPU. CPU works faster with higher frequencies whereas peripheral needs lower frequency to work with. The Peripheral Clock (PCLK) and CPU Clock (CCLK) gets clock input from a PLL or from external source.
  The Peripheral Clock i.e. PCLK is derived from CPU Clock i.e. CCLK. The APB Divider decides the operating frequency of PCLK. The input to APB Divider is CCLK and output is PCLK. By Default PCLK runs at 1/4th the speed of CCLK.

Request price match for the LPC2129 ARM Header Board - rhydoLABZ

Found this item with same quality and at a lower price but prefer to buy from rhydoLABZ.com?

Please submit the url of the better price you saw. We will lauch an immediate investigation and try our best to beat the price, if it proves to be the same product. We will notify you the result by email. Thanks a lot for helping us to maintain competitive prices.