Description: This Evaluation Board for iMCU W7100A aids Quick Test of W7100A. iMCU W7100A is the one-chip solution which integrates an 8051 compatible micro-controller, 64KB SRAM and hardwired TCP/IP core for high performance and easy development. The TCP/IP core is a market-proven hardwired TCP/IP stack with an integrated Ethernet MAC & PHY. The Hardwired TCP/IP stack supports the TCP, UDP, IPv4, ICMP, ARP, IGMP and PPPoE which has been used in various applications for years. This quick test evaluation board is also equipped with expansion ports and support various interfaces such as serial, ethernet, DTAG(Debugger Socket) etc!
Evaluation Board Features:
-
Quick Test of W7100
-
Expansion Port
-
Provide WizISP for programming
-
Support Debugger for Debugging
-
Support Various Interfaces : Serial, Ethernet, DTAG (Debugger Socket)
-
Embedded 64kBytes Flash memory, 64kBytes RAM, and 256Bytes Data Flash
Evaluation Board Specifications:
| MCU |
Internet Embedded MCU - W7100A
|
8051
compatible
|
|
Memory
|
64KBytes Data Memory
64KBytes Code Memory
2KBytes Boot code Memory
256Bytes Data Flash |
Embedded in W7100A |
| Serial |
On board RS-232C 1Port with DB9 Connector |
|
| Ethernet |
On board MAC-Jack (Transformer + RJ-45 Connector) |
|
| LCD |
16Character * 2Line Character LCD |
|
| LED |
User Debugging LED 3Ea
Network Status LED 8Ea |
|
| Button |
Reset Switch 1Ea
|
|
| Debugger |
On board Debugger Socket |
|
| Expansion Port |
MCU port expansion
- 32Pin (8pin*4) 2.54mm Pitch Pin-Header Hole
- 14Pin (7pin*2) 2.54mm Pitch Pin-Header Hole
- 32Pin (8pin*4) 2.00mm Pitch Pin-Header Hole
- 14Pin (7pin*2) 2.00mm Pitch Pin-Header Hole
Dummy Hole
|
|
| Power |
DC 5V / 2A Adapter
|
|
| PCB |
120mm * 80mm Size |
|
W7100A Chip Features:
- Industrial standard 8051
- Pipelined architecture 4~5 times faster than other 8051
- 2 data pointers for fast memory block processing
- 64KByte Flash, 64Kbyte SRAM, 2Kbyte Boot ROM, 255Byte Data Flash
- External 11.0592MHz operation frequency for internal PLL logic
- Interrupt Controller : 2 priority levels / 4 external interrupt sources / 1 watchdog interrupt
- Four 8 bit I/O ports
- Three timers/counters
- Full Duplex UART
- Programmable Watchdog Timer
- Hardwired TCP/IP protocols
- TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
- Un-attackable hardware network engine for preventing network attacks such as flooding, spoofing, injection
- 8 Independent hardware socket
- Internal 32Kbytes memory for TCP/IP packet processing
- 10BaseT / 100Base TX Ethernet PHY Embedded
- Support Auto-Negotiation (Full & Half Duplex, 10 & 100 Based)
- Support Auto-MDIX
- 3V Operation with 5V I/O signal tolerance
- 100LQFP (13x13mm), 64QFN (10x10mm) Lead Free Package
Resources:
There are currently no any question about this product.
