Menu
Your Cart
Dear Valued Customers: We're excited to announce our move to a new website!  Existing Customers, kindly utilize the 'Forgot Password' option to update the Password. Thank you for your cooperation!

STM32F103VET6 Cortex developement board

STM32F103VET6 Cortex developement board
STM32F103VET6 Cortex developement board
STM32F103VET6 Cortex developement board
STM32F103VET6 Cortex developement board
STM32F103VET6 Cortex developement board
STM32F103VET6 Cortex developement board
STM32F103VET6 Cortex developement board
STM32F103VET6 Cortex developement board
STM32F103VET6 Cortex developement board
  • Stock: Out Of Stock
  • Brand: Chineese
  • Model: DEV-2727
  • Weight: 0.20kg
Rs 1,649

The STM32F103VET6 medium-density performance line family incorporates the high-performance ARM Cortex M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 512 Kbytes and SRAM up to 64 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses.The ARM Cortex-M3 32-bit RISC processor features exceptional code efficiency, delivering high performance which is expected from an ARM core in the memory size usually associated with 8-bit and 16-bit devices. The STM32F103 Performance Line family has an embedded ARM core and is therefore compatible with all ARM tools and software. It combines the high performance ARM Cortex-M3 CPU with an extensive range of peripheral functions and enhanced I/O capabilities.

STM32F103VET6 Specifications:

    ARM 32-bit Cortex-M3 CPU Core

  •         72 MHz maximum frequency,1.25 DMIPS/MHz performance at 0 wait state memory access
  •         Single-cycle multiplication and hardware division

    Memories

  •         128 Kbytes of Flash memory
  •         20 Kbytes of SRAM

    Clock, reset and supply management

  •         2.0 to 3.6 V application supply and I/Os
  •         POR, PDR, and programmable voltage detector (PVD)
  •         4 to 16 MHz crystal oscillator
  •         Factory-trimmed 8 MHz RC
  •         Internal 40 kHz RC
  •         PLL for CPU clock
  •         32 kHz oscillator for RTC with calibration

    3 x 12-bit, 1 µs A/D converters (up to 16 channels)

  •         Conversion range: 0 to 3.6 V
  •         Dual-sample and hold capability
  •         Temperature sensor

    DMA

  •         7-channel DMA controller
  •         Peripherals supported: timers, ADC, SPIs, I2Cs and USARTs
  •         Up to 80 fast I/O ports

    Debug mode

  •         Serial wire debug (SWD) & JTAG interfaces

    7 timers

  •         Three 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature encoder input
  •         16-bit, motor control PWM timer with dead-time generation and emergency stop
  •         2 watchdog timers (Independent and Window)
  •         SysTick timer 24-bit downcounter

    9 communication interfaces

  •         Up to 2 x I2C interfaces (SMBus/PMBus)
  •         Up to 3 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)
  •         Up to 2 SPIs (18 Mbit/s)
  •         CAN interface (2.0B Active)
  •         USB 2.0 full-speed interface

Note: Supports programming via USB, Do not need programmer or any jumper or switch setup.

Packages included:

  •  1 x Development board
  •  1 x USB cable (Mini / 80cm)

Resources:

Write a review

Please login or register to review