Description: The eCee PIC18F4550 Development Board can be used to evaluate and demonstrate the capabilities of Microchip PIC18F4550 microcontroller. The MCU socket on board provides support for 40 pin DIP package of PIC18F4550 controller. The board is designed for general purpose applications and includes a variety of hardware to exercise microcontroller peripherals. It is a fantastic tool for code debugging, development and prototyping. The all new board design have made it much more user-friendly than its predecessors, ideally suitable for training and development purposes. The components used in this board are of high quality and the PCB is high quality two layer PTH PCB, which makes this board especially durable. When you start using the eCee PIC18F4550 Development Board you will find it to be one of the best development tool available for PIC18F4550 controller. Here below you will find the key features of this product.
eCee PIC18F4550 Features
- Compact and Ready to use design
- Professional and Fully EMI/RFI Complaint PCB Layout Design for Noise Reduction
- High Quality Two layer PTH PCB
- Includes PIC18F4550 Microcontroller with built in USB Peripheral
- Board Supports PIC 16F877/18F 4520/4580 Microcontrollers
- No separate programmer required (Built in Boot loader)
- No Separate power adapter required (USB power source)
- Screw terminal for External power Supply (with Jumper Select Option)
- External Power Supply range of 7V to 20V
- Adaptor (any standard 9-12V power supply) option
- RS-232 Interface (For direct connection to PC’s serial port)
- On board Two Line LCD Display (2x16)
- On board I2C EEPROM (4K-AT24C04).
- On board I2C RTC (DS 1307) with Crystal and Battery
- Four multiplexed 7-Segment LED Display
- Built in Matrix keyboard (12 keys)
- Built in Pull-Up (4 Keys) Keyboard • Built in IR Sensor Interface – TSOP 1738
- Built in 8 LED Interface to test I/O
- On Board External Interrupt and Reset buttons
- Built in Pot interface to ADC
- On Board Temperature Sensor Interface (LM35)
- On Board Buzzer Interface
- On Board PWM Output pin
- On Board ICD Connector for Debugging/Programming
- On Board ICSP Connector
- On Board 20 MHz Crystal Oscillator
- On Board Power LED Indicator
- All Port Pins available at IDC (2x5) Connector
- Can be used as main board for developing applications
- Power Supply Reverse Polarity Protection
- On Board 1 Amp Voltage Regulator
- Demo HEX codes included for testing of board features
- Example codes included
PIC18F4550 Chip Specification
- Microchip PIC 18F4550 with 20 MHz Crystal Oscillator (With Boot loader Software)
- Supports USB V2.0 with Speed range from 1.5Mbps to 12Mbps
- 32 KB Programmable Flash Memory
- 2048 bytes Data Memory (SRAM)
- 256 bytes EEPROM
- Supports Up to 48 MHz Operation
- 35 I/O pins
- 13-Channel 10-bit Analog to Digital Converter(ADC)
- One Capture module/ Compare Module/PWM Module
- One Enhanced Capture Module/ Compare Module/ PWM module
- Streaming Parallel Port (SPP) for USB Streaming Transfers
- One 8-Bit Timer/Counter
- Three 16-Bit Timer/Counter
- One Enhanced USART (Supports RS-232 and LIN 1.3)
- One Master Synchronous Serial Port (MSSP)
- One Serial Peripheral Interface(SPI) Module
- One Inter-Integrated Circuit (I2C) Module
- Power-On Reset (POR), Power-Up Timer (PWRT) and Oscillator Start-up Timer (OST)
- Interrupt Capability (up to 20 sources)
- Three External Interrupts
- In-Circuit Serial Programming (ICSP) via two pins
- In-Circuit Debug (ICD) via two pins
- Optional dedicated ICD/ICSP port
- Programmable Brown Out Reset
- Programmable Low Voltage Detect
- Power Saving Sleep Mode
- Extended WatchDog Timer(WDT)
- wide Operating Voltage Range of 2.0V to 5.5V
- Low Power Consumption using nanoWatt Technology
eCee PIC18F4550 Package Includes
Downloads
