Description: The AVR ATmega32 Development Board can be used to evaluate and demonstrate the capabilities of AVR ATmega32 microcontroller. The MCU socket on board provides support for 40 pin DIP package of AVR ATmega32 controller. The board is designed for general purpose applications and includes a variety of hardware to exercise microcontroller peripherals. It is a fantastic tool for code debugging, development and prototyping. The all new board design have made it much more user-friendly than its predecessors, ideally suitable for training and development purposes. The components used in this board are of high quality and the PCB is high quality two layer PTH PCB, which makes this board especially durable. When you start using the AVR ATmega32 Development Board you will find it to be one of the best development tool available for AVR ATmega32 controller. Here below you will find the key features of this product.
eCee AVR ATMega32 Features
- Compact and Ready to use design
- Professional EMI/RFI Complaint PCB Layout Design for Noise Reduction
- High Quality Two layer PTH PCB
- Includes AT MEGA32 Microcontroller
- Board Supports AVR AT MEGA16AT MEGA8535 Microcontrollers
- No separate programmer required (Built in Boot loader)
- No Separate power adapter required (USB power source)
- Screw terminal for External power Supply (with Jumper Select Option)
- External Power Supply range of 7V to 20V
- Adaptor (any standard 9-12V power supply) option
- RS-232 Interface (For direct connection to PC’s serial port)
- On board Two Line LCD Display (2x16)
- On board I2C EEPROM (4K-AT24C04)
- On board I2C RTC (DS 1307) with Crystal and Battery
- Four multiplexed 7-Segment LED Display
- Built in Matrix keyboard (12 keys)
- Built in Pull-Up (4 Keys) Keyboard
- Built in IR Sensor Interface – TSOP 1738
- Built in 8 LED Interface to test I/O
- On Board External Interrupt and Reset buttons
- Built in Potentiometer interface to ADC
- On Board Temperature Sensor Interface (LM35)
- On Board Buzzer Interface
- On Board PWM Output pin
- On Board JTAG Connector for Debugging/Programming
- On Board ISP Connector
- On Board 16 MHz Crystal Oscillator
- On Board Power LED Indicator
- On Board DB9 Connector
- On Board USB Connector
- All Port Pins available at IDC (2x5) Connector
- Can be used as main board for developing applications
- Power Supply Reverse Polarity Protection
- On Board 1 Amp Voltage Regulator
- Demo HEX codes included for testing of board features
- Example codes included
AVR ATMega32 Chip Specification
- Atmel AVR AT Mega32 with 8 MHz Crystal Oscillator (With Boot loader Software)
- 32 K bytes programmable flash
- 2 K bytes SRAM
- 1024 bytes EEPROM
- 16 MHz operation (Up to 16MIPS)
- 32 I/O pins
- 8 channel 10 bit ADC
- 4 PWM Channels
- Two 8-Bit Timer/Counter
- One 16-Bit Timer/Counter
- One Serial USART
- 1 Two Wire Serial Interface TWI
- SPI Master/ Slave
- Power Consumption ~ 20 mA
eCee AVR ATMega32 Package Includes
Downloads
