The eCee AT89S52/53 Development Board can be used to evaluate and demonstrate the capabilities of AT89S52/53 microcontroller. The MCU socket on board provides support for 40 pin DIP package of AT89S52/53 controller. The board is designed for general purpose applications and includes a variety of hardware to exercise microcontroller peripherals. It is a fantastic tool for code debugging, development and prototyping. The all new board design have made it much more user-friendly than its predecessors, ideally suitable for training and development purposes. The components used in this board are of high quality and the PCB is high quality two layer PTH PCB, which makes this board especially durable. When you start using the eCee AT89S52/53 Development Board you will find it to be one of the best development tool available for AT89S52/53 controller. Here below you will find the key features of this product.
Note: Separate programmer required for programming this device, we recommend buying
eCee AT89S52/53 Features:
- Compact and Ready to use design
- Professional EMI/RFI Complaint PCB Layout Design for Noise Reduction
- High Quality Two layer PTH PCB
- Includes AT89S52/53 Microcontroller
- No Separate power adapter required (USB power source)
- Screw terminal for External power Supply (with Jumper Select Option)
- External Power Supply range of 7V to 20V
- Adaptor (any standard 9-12V power supply) option
- RS-232 Interface (For direct connection to PC’s serial port)
- On board Two Line LCD Display (2x16)
- On board I2C EEPROM (4K-AT24C04)
- On board I2C RTC (DS 1307) with Crystal and Battery
- Four multiplexed 7-Segment LED Display
- Built in Matrix keyboard (12 keys)
- Built in Pull-Up (4 Keys) Keyboard
- Built in IR Sensor Interface – TSOP 1738
- Built in 8 LED Interface to test I/O
- On Board two External Interrupts and Reset buttons
- On Board Buzzer Interface
- On Board Relay Interface
- On Board JTAG Connector for Debugging/Programming
- On Board ISP Connector for Atmel microcontrollers
- On Board ISP Connector for Philips microcontrollers
- On Board 16 MHz Crystal Oscillator
- On Board Power LED Indicator
- On Board DB9 Connector
- On Board USB Connector
- All Port Pins available at IDC (2x5) Connector
- Can be used as main board for developing applications
- Power Supply Reverse Polarity Protection
- On Board 1 Amp Voltage Regulator
- Demo HEX codes included for testing of board features
- Example codes included
AT89S52/53 chip Specification:
- Atmel AT 89S52/53 with 11.0592 MHz Crystal Oscillator
- 8 K bytes programmable flash
- Three Level program memory lock
- 256 Bytes of SRAM
- Eight Interrupt sources
- 32 Programmable I/O Lines
- Low Power, Idle and Power Down Modes
- Interrupt Recovery from Power-down Mode
- Watchdog Timer
- Dual Data Pointer
- Power-off Flag
- Three 16-Bit Timer/Counter
- One Serial USART
- Power Consumption: ~ 25mA
- Operating voltage: ~ 5V for AT89S52/53
eCee AT89S52/53 Package Includes:
Downloads
