AT89S52 Development Board Mini - rhydoLABZ

(1) 5 out of 5 stars Write reviewReport bug
  • Part No :
  • DEV-2591
  • Availability:
  • In Stock
  • Shipping :
  • Same Day*
  • Weight:
  • 1Kg
  • Made By:
  • rhydoLABZ
  • Mfr.Part.No:
  • DEV-2591
  • Quality Rank:
  • 100/100
Rs 2399
(Excluding GST.)
Rs 2831
(Including GST)
2831 New In Stock
  • Buy & earn 240  reward points
  • GST Invoice & Input Credit Available
Qty Discount Price (Excl.GST)
1 Rs 2399
2-4 Rs 2327
5-9 Rs 2255
10-24 Rs 2159
25+ Rs 2039
Quantity :
The all New AT89S52 Development Board-Mini can be used to evaluate and demonstrate the capabilities of Atmel89S52 microcontrollers. Since all I/O pins are broken out on Male and female Berg strips, it is very easy to use for development purpose as well. The board is designed for general purpose applications and it includes a variety of hardware to exercise microcontroller peripherals. Onboard Mini Bread board is provided to ease the use,Ideally suitable for training and development purposes. Apart from this there is an onboard 2MM pitch Female sockets on both bottom and top side to insert Xbee module as per convenience. Since there are different modules ( GPSBee, Bluebee, RFBee Etc) are available in the XBEE form factor, it will be easy to interface and experiment all of them .Onboard 5v to 3v3 MOSFET based level converter and 3V3 Voltage regulator provide safe interface to XBEE and other low voltage devices .The onboard 5V regulator is having current rating of 1A and  3V3 voltage regulator is having 500mA capacity to easily power almost all onboard devices as well as external devices. All I/O pins and Power pins (5V & 3V3) are made available at Female header pins around the Breadboard to ease the wiring. Apart from this the All I/O pins are ready at male berg strips in two rows under the LCD. The UART pins are available at separate RMC Connector with power (VCC & GND). A 3v3UART is provided with the help of onboard MOSFET voltage level converter.
  The onboard mini-B type USB connector can be used to power the board as well as to communicates with PC. A jumper is provided to select the PC interfacing method (USB or RS232). The development board can be programed by internal bootloader(philips 89V51RD2) or ISP Programmer.A separate 2x5 pin shrouded male connector  has been provided to connect  philips and atmel ISP Programmer/Debugger. Apart from USB the board has two more powering options like DC Adapter jack and 2Pin RMC connector with Reverse polarity protection. Available onboard peripheral interfaces are 3nos Pull-up switches, 3nos LEDs,buzzer,16X2 LCD,RS232,USB,Voltage Level Converter and connectors for xbee, sockets for RFID Module (EM18 or uRFID) ,SERVO Motor, UART, Isp programmer/Debugger etc.

  All these peripheral interfaces can be disconnected by removing onboard PCB jumpers to free up the I/O PINS for other purposes.

Note: Separate programmer required for programming this device, we recommend buying


  • Includes Atmel89S52 Microcontroller 
  • Compact and Ready to use design 
  • Professional EMI/RFI Complaint PCB Layout Design for Noise Reduction
  • High Quality Two layer PTH PCB
  • No Separate power adapter required (USB power source)
  • RS-232 Interface (For direct connection to PC’s Serial port)
  • USB Interface to connect to PC
  • On Board Mini Breadboard for experiments
  • On Board Two Line LCD Display (2x16)
  • POT for LCD Contrast controlling
  • On Board 3 LED Interface to test Port pin (with jumper select option)
  • On Board Buzzer Interface 
  • On Board 3 Button Pull-up Keyboard interface
  • On Board 3.3V Regulator
  • On Board Reset Switch
  • On Board Connector for SERVO Output
  •  On Board Connector to interface Xbee module on top/bottom side
  • On Board Connector to interface EM-18 compatible µRFID Reader module on top side
  • On Board Power LED Indicator
  • Adapter (any standard 9-12V power supply) option 
  • All Port Pins available at Male Berg Strip 
  • All Port Pins available at Female Berg Strip around Bread board
  • On Board ICSP Connector for Debugging/Programming
  • Power Supply Reverse Polarity Protection
  • On Board DB9 Connector
  • On Board USB Connector
  • On Board 1 Amp Voltage Regulator
  • On Board regulated 3V3 output
  • On Board regulated 5V output
  • Can be used as main board for developing applications
  • On Board 11.0592 MHz Crystal Oscillator

Atmel89S52 Chip Specification:

  • Atmel AT 89S52 with 11.0592 MHz Crystal Oscillator
  • 8K bytes programmable flash
  • Three Level program memory lock
  • 256 Bytes of SRAM
  • Eight Interrupt sources
  • 32 Programmable I/O Lines
  • Low Power,Idle and Power Down Modes
  • Interrupt Recovery from Power-down Mode
  • Watchdog Timer
  • Dual Data Pointer
  • Power-off Flag
  • Three 16-Bit Timer/Counter
  • One Serial USART
  • Power Consumption ~25mA
  • Operating voltage 5V for AT89S52

Package Includes:

Documents & Downloads:

Sort by: Recently  /  Helpful Write review

Gud for 8051 developrs

By Narayan from Ranchi, India on April 27, 2016
pretty gud one for 8051 based projects.
2 of 2 people found this review helpful
Was this review helpful to you?   Yes   No

There are currently no any question about this product.

Ask a question about AT89S52 Development Board Mini - rhydoLABZ

Report issue about the AT89S52 Development Board Mini - rhydoLABZ

Ask a question about the AT89S52 Development Board Mini - rhydoLABZ

Report issue about the AT89S52 Development Board Mini - rhydoLABZ

Request price match for the AT89S52 Development Board Mini - rhydoLABZ

Found this item with same quality and at a lower price but prefer to buy from

Please submit the url of the better price you saw. We will lauch an immediate investigation and try our best to beat the price, if it proves to be the same product. We will notify you the result by email. Thanks a lot for helping us to maintain competitive prices.

AT89S52 Development Board Mini - rhydoLABZ