Menu
Your Cart
Dear Valued Customers: We're excited to announce our move to a new website!  Existing Customers, kindly utilize the 'Forgot Password' option to update the Password. Thank you for your cooperation!

Artemis Development Kit with Camera - Sparkfun USA

Artemis Development Kit with Camera - Sparkfun USA
Artemis Development Kit with Camera - Sparkfun USA
Artemis Development Kit with Camera - Sparkfun USA
Artemis Development Kit with Camera - Sparkfun USA
Artemis Development Kit with Camera - Sparkfun USA
Artemis Development Kit with Camera - Sparkfun USA
Artemis Development Kit with Camera - Sparkfun USA
Artemis Development Kit with Camera - Sparkfun USA
Artemis Development Kit with Camera - Sparkfun USA
This product qualifies for free shipping
Exciting news! Orders over 1999/- now get free shipping. Happy shopping with complimentary shipping!
  • Stock: In Stock
  • Brand: Sparkfun - USA
  • Model: DEV-3364
  • Weight: 0.13kg
  • MPN: KIT-17071
Rs 4,599

The Artemis Development Kit is the latest board to be released around the SparkFun Artemis Module and it allows access to more software development features than previous Artemis based boards. This Kit includes the SparkFun Artemis DK board as well as the accessories (Himax camera & USB-C cable) needed to get started right away. Recommended software used to program the Artemis DK are the Arduino IDE, Arm® Mbed™ OS (Studio and CLI), and AmbiqSDK. An updated USB interface (MKL26Z128VFM4 Arm® Cortex®-M0+ MCU, from NXP) allows the Artemis Dev Kit to act as:

  • Mass Storage Device (MSD): Used to provide drag and drop programming to the Artemis Module.
  • Human Interface Device (HID): Used for the debugging interface to the Artemis Module.
  • Communication Port (COM): Used to provide a serial communication UART between the Artemis and the USB connection (PC)

The Artemis Module provides a Cortex®-M4F with BLE 5.0 running at 48MHz with an available 96MHz turbo mode and power as low as 6uA per MHz (less than 5mW). The SparkFun Artemis Module is fully FCC/IC/CE certified with 1M flash and 384k RAM you'll have plenty of room for your code. The flexibility of the Artemis module starts with our Arduino core. You can program and use the Artemis module just like you would an Uno or any other Arduino. Additional functionality stems from the ability of the Artemis Dev kit to run RTOS such as the Arm Mbed OS, or the AmbiqSDK.

Features: 

Artemis Dev Kit

  • Compatible with Arduino, Mbed™ OS, and AmbiqSDK Development Programs
  • Power:
    • 5V Provided Through the USB-C Connector
    • 1.8V, 3.3V, and 5V Available on Power Header
  • Interface Chip (MKL26Z128VFM4 ARM® Cortex®-M0+ MCU):
    • Drag and Drop Programming
    • SWD Interface
    • JTAG Programming PTH
  • Artemis Module:
    • Apollo3 ARM® Cortex®-M4F MCU
    • BLE 5.0 with FCC Certification
    • 24 Breakout I/O Pins
      • Eight 14-bit ADC Pins
      • Eighteen 16-bit PWM Pins
      • Two Independent UART Ports
      • Three Peripheral I2C/SPI Buses
    • JTAG Programming PTH
  • Sensors:
    • 3-axis Accelerometer (LIS2DH12)
    • PDM Microphone (SPH0641LM4H-1)
    • Camera Connector (for the Himax HM01B0 Camera)
  • Qwiic Connector
    • On Primary I2C Bus

Sensor Parameters

  • Active Pixel Array 320 x 320
  • Pixel Size 3.6 µm x 3.6 µm
  • Full Image Area 1152 µm x 1152 µm
  • Diagonal (Optical Format) 1.63 mm (1/11″)
  • Color Filter Array Monochrome and Bayer
  • Scan Mode: Progressive
  • Shutter Type: Electronic Rolling Shutter
  • Frame Rate MAX 51 fps @ 320 x 320, 60 fps @ 320 x 240 (QVGA)
  • CRA (maximum) 30º

Himax HM01B0 Camera

  • Ultra Low Power Image Sensor (ULPIS) designed for Always On vision devices and applications
  • High sensitivity 3.6µ BrightSenseTM pixel technology
  • 320 x 320 active pixel resolution with support for QVGA window, vertical flip and horizontal mirror readout
  • Programmable black level calibration target, frame size, frame rate, exposure, analog gain (up to 8x) and digital gain (up to 4x)
  • Automatic exposure and gain control loop with support for 50 / 60Hz flicker avoidance
  • Flexible 1bit, 4bit and 8bit video data interface with video frame and line sync
  • Motion Detection circuit with programmable ROI and detection threshold with digital output to serve as an interrupt
  • On-chip self oscillator
  • I2C 2-wire serial interface for register access
  • High CRA for low profile module design

Package Includes:

  • 1x Artemis Development Kit (Board)
  • 1x Himax HM01B0 Camera
  • 1x Reversible USB A to C - 0.8m

Documents / Downloads:

Write a review

Please login or register to review