The MCP23S17-E/SS is a 16-bit I/O expander with SPI interface from Microchip. It is a general purpose device that provides an easy way to add more I/O pins to a microcontroller. The device can be used to expand the number of I/O pins available on a microcontroller, allowing more complex control and ..
The USB to Serial CH340E IC is a USB bus conversion chip, it can realize USB to UART interface or USB to printer interface. In serial UART mode, CH340E provides common MODEM liaison signal, used to expand UART interface of computer or upgrade the common serial device to USB bus directly. CH340 is a ..
LDO VOLTAGE REGULATOR, 3.3V, 150mA, 5-SOT-23 product from TEXAS INSTRUMENTS with the model number LP2985A-33DBVR. Its a Low-noise Low-dropout Regulator. The output voltage of LP2985-50DBVR is 5V and delivers up to 150 mA at each channel and also offers low dropout voltage to prolong battery life in ..
The MAX481, MAX483, MAX485, MAX487–MAX491, and MAX1487 are low-power transceivers for RS-485 and RS-422 communication. Each part contains one driver and one receiver.
Features:
Low Power Consumption Minimizes Thermal Dissipation, Reducing System Cost
120µA to 500µA Quiescent Current
Shutdo..
L293D Push-Pull four channel driver with diodes is assembled in a 16 lead package which has 4 center pins connected together and used for heatsinking. This is a monolithic integrated high voltage, high current four channel driver.Motor drivers act as current amplifiers since they take a low-current ..
The MAX3421E USB peripheral/host controller contains the digital logic and analog circuitry which is necessary to implement a full-speed USB peripheral or a full-/low-speed host compliant to USB specification rev 2.0. A built-in transceiver features ±15kV ESD protection and programmable USB connect ..
The MCP2510-I/P is a stand-alone CAN Controller with SPI interface.It supports CAN 1.2, CAN 2.0A, CAN 2.0B passive and CAN 2.0B active versions of the protocol and capable of transmitting and receiving standard and extended messages. It is also capable of both acceptance filtering and message manage..
The SYN470R is a single chip ASK/OOK (ON-OFF Keyed) RF receiver IC. This device is a true “antenna-in to data-out” monolithic device. All RF and IF tuning are accomplished automatically within the IC which eliminates manual tuning and reduces production costs. The result is a highly reliable yet low..
The iW1700 is a high performance AC/DC SMPS power supply controller which uses digital control technology to build peak current mode PWM flyback power supplies. The device together with an external active device provides a fast start-up meanwhile achieving ultra-low no-load power consumption. The de..
The chip is a push-pull driver for small transformers used in multiple applications, including isolated interfaces such as RS-485, RS-232, RS-422, I2C, or low power LAN. Typical markets for this product include industrial, automation, and medical market sectors. The key benefits of Würth Electronics..
P-channel enhancement mode vertical Diffusion Metal-Oxide Semiconductor (DMOS) transistor in a small Surface-Mounted Device (SMD) plastic package.This very high density process minimizes on-state resistance and to provide rugged and reliable performance and fast switching. The BSS84 can be used, wit..
The NAU8810 a cost effective low power wideband Monophonic audio CODEC. It is suitable for a wide range of audio applications, including voice telephony. The NAU8810 a Mono Audio CODEC with very robust ADC and DAC capabilities. The device provides one differential microphone input pair (MIC- & MIC+ ..
The ISO1050 is a galvanically isolated CAN transceiver that meets the specifications of the ISO11898-2 standard. The device has the logic input and output buffers separated by a silicon oxide (SiO2) insulation barrier that provides galvanic isolation of up to 2500 VRMS for ISO1050DUB. It is used in ..
The SYN115 is a high performance, easy to use, single chip ASK Transmitter IC for remote wireless applications in the 300 to 450MHz frequency band. This transmitter IC is a true “data-in, antenna-out” monolithic device.It requires a reference frequency (RF carrier frequency divided by 32 times) gene..
The NE555 timing circuits is a highly stable controller capable of producing accurate time delays or oscillation. In the time-delay or mono-stable mode of operation, the timed interval is controlled by a single external resistor and capacitor network. In the astable mode of operation, the frequency ..