SMAJ12CA is 400W 12V Bi-Directional transient voltage suppression diode. It is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features:Polarity : Bidirectional Number of Channels..
SMAJ12A 15V 400W surface mount unidirectional transient voltage suppression diode. It is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. It is ideal for the protection of I/O interfaces, VCC bus and othe..
SMAJ15A is a 15V 400W, surface mount unidirectional transient voltage suppression diode. It features excellent clamping capability, glass passivated junction, low inductance, low profile package, built-in strain relief and fast response time of typically less than 1.0ps from 0Vs to VBR min. Thi..
Fr107 is a Fast Recovery Rectifier diode, designed specifically for circuits that need to convert alternating current to direct current. It can pass currents of up to 1 A, and have peak inverse voltage (PIV) rating of 1,000 V.
Features of FR107- Fast Recovery Rectifier diode
High Reliabi..
The 1N5819HW-7-F is a surface mount Rectifier Diode. Suitable for low voltage, high frequency inverters. The rectifier diode have a high current capability and low forward voltage drop.The device is a single rectifier offering low VF and excellent high temperature stability. This device is ideal for..
The SM6T6V8CA is a bidirectional Transil series has been designed to protect sensitive equipment against electrostatic discharges according to IEC 61000-4-2 and MIL STD 883, method 3015, and electrical overstress according to IEC 61000-4-4 and 5. These devices are more generally used against surges ..
The MMSZ4688T1G surface mount Voltage Regulator Zener Diode designed for optimal automated board assembly. These devices provide a convenient alternative to the leadless 34-package style.
Features of MMSZ4688T1G Zener Voltage Regulator
500mW Rating on FR-4 or FR-5 board
1.8 to 43V Wide..
SparkFun Lumenati 90L is a small quarter-circle board equipped with three APA102C LEDs and a single mounting position that has been designed to give your projects an edge in their lighting capacity. The 90L board has been specifically designed to be daisy-chained with other Lumenati boards. Addition..
SparkFun Lumenati 90R is a small quarter-circle board equipped with three APA102C LEDs and a single mounting position. The 90R board has been specifically designed to be daisy-chained with other Lumenati boards. The APA102C LEDs on each board with numbers indicating their position in the sequence to..
SparkFun Lumenati 8-pack is a coin-sized board equipped with seven APA102C LEDs surrounding the outer edge of the board, with one in the center.The 8-pack board can be daisy-chained with other Lumenati boards. The APA102C LEDs on each board with numbers indicating their position in the sequence to w..
SparkFun Lumenati 4-pack is a coin-sized board equipped with four APA102C LEDs surrounding the outer edge. The 4-pack board can be daisy-chained with other Lumenati boards.The APA102C LEDs on each board with numbers indicating their position in the sequence to write code more easily.The APA102C addr..
SparkFun LED Driver Breakout - LP55231 is a self-contained solution for developing and deploying the nine-channel I2C LED controller. The breakout is equipped primarily with just the LP55231 LED controller IC and three RGB LEDs. It also features pads and jumpers for replacing the onboard LEDs with e..
The SMF05CT1G 5 Line TVS diode array is a 5-line transient voltage suppressor array designed for application requiring transient voltage protection capability. It is intended for use in over-transient voltage and ESD sensitive equipment such as printers, networking communication and other applicatio..
BZX84C5V1-5V Zener diodes are rated for 5.1 volts. Zener diodes are useful for creating a reference voltage or a voltage stabilizer.
Specifications of BZX84C5V1-5V Zener diodes :
Voltage Vz : 5.1V
Tolerance : ±5%
Power Max : 250mW
Zener Impedance : 60 Ohm
Reverse Lea..
These high power LED modules comes with a 3W high-power lamp beads.
Specifications of 3W LED high power module
Color temperature: white 6000-6500K
Forward current: 700MA
Luminous flux: White 180-200LM (lumens)
Forward voltage: 3.3 - 3.6 V
Reverse voltage: 5V
Power: 3W
Viewing an..