Arduino UNO - R3 with USB Cable (Orginal Arduino-Italy)

(12) 4.92 out of 5 stars Write reviewReport bug
  • Part No :
  • ARD-1466
  • Availability:
  • In Stock
  • Shipping :
  • Same Day*
  • Weight:
  • 0.2Kg
  • Made By:
  • Arduino - Italy
  • Mfr.Part.No:
  • A000066
  • Quality Rank:
  • 100/100
Rs 1499
(Excluding GST.)
Rs 1769
(Including GST)
1769 New In Stock
  • Buy & earn 150  reward points
  • GST Invoice & Input Credit Available
Qty Discount Price (Excl.GST)
1-4 Rs 1499
5-24 Rs 1469
25-49 Rs 1424
50-99 Rs 1394
100+ Rs 1349
Quantity :

Arduino UNO - R3 with USB Cable includes both Arduino Uno board and compatible USB Cable. Arduino UNO - R3 is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable & start innovating.

Arduino UNO - R3 differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega16U2 (Atmega8U2 up to version R2) programmed as a USB-to-serial converter. Revision 2 of Arduino UNO has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU mode. Revision 3, Arduino UNO - R3 has the following new features:

  • 1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible with both the board that uses the AVR, which operates with 5V and with the Arduino Due that operates with 3.3V. The second one is a not connected pin, that is reserved for future purposes.
  • Stronger RESET circuit
  • Atmega 16U2 replaces 8U2.

"UNO" means one in Italian and is named to mark the upcoming release of Arduino 1.0. The Uno and version 1.0 will be the reference versions of Arduino, moving forward. The Uno is the latest in a series of USB Arduino boards, and the reference model for the Arduino platform.

Note: This is 100% GENUINE ARDUINO board.

Arduino UNO - R3 Features:

  • Microcontroller ATmega328 (PDIP)
  • Operating Voltage 5V
  • Input Voltage (recommended) 7-12V
  • Input Voltage (limits) 6-20V
  • Digital I/O Pins 14 (of which 6 provide PWM output)
  • Analog Input Pins 6
  • DC Current per I/O Pin 40 mA
  • DC Current for 3.3V Pin 50 mA
  • Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader
  • SRAM 2 KB (ATmega328)
  • EEPROM 1 KB (ATmega328)
  • Clock Speed 16 MHz

Arduino UNO - R3 Dimensions:

  • Length: 2.7"
  • Width: 2.1"

Arduino UNO - R3 Package:

Arduino UNO - R3 Resources:

Sort by: Recently  /  Helpful Write review

By ALOK MOHANTY from N/A on August 12, 2015
Received my first ever arduino uno. Mighty excited about it. Thank you Rhydolabz for being prompt in delivery of the product, and that too 100% genuine. Hope to continue this journey with your support.
0 of 2 people found this review helpful
Was this review helpful to you?   Yes   No

By RIJUL TANDON from N/A on November 15, 2013
2 of 2 people found this review helpful
Was this review helpful to you?   Yes   No

By Priyan Sagar from N/A on August 09, 2013
Arduino UNO is a great board to start with. It'll make life to almost all of your ideas. I love it!
Was this review helpful to you?   Yes   No

By SUMIT SARKAR from N/A on June 04, 2013
thank you Rhydolabz...bought this with a Ethernet shield...solid product...
Was this review helpful to you?   Yes   No

By THUSHAR V NADH from N/A on June 02, 2013
We think, most of the peoples have USB cable in hand,So atleast we can reduce the cost for cable and saves our earth from plastics!!
2 of 2 people found this review helpful
Was this review helpful to you?   Yes   No
    • Q
    • Is this genuine arduino board from italy?

      asked by Alen Thomas on April 23, 2016
    • A
    • Yes, these are genuine Arduino Boards from Italy.

    • Q
    • will I get a replacement/refund in case if a get a defective product?

      asked by Alen Thomas on April 23, 2016
    • A
    • We request our customers to check for defects as soon as the product gets delivered as we do provide a window of 15 days to report any defects caused during manufacturing or while shipping. These will be subjected to immediate replacement.

      Also, this being an arduino product, will be having 1 year OEM warranty for any issues caused.

    • Q
    • Which power supply adapter should i use for this board to work other than the usb cable?

      asked by Arnav Rajesh on June 05, 2016
    • A
    • An arduino UNO can be powered via USB, barrel jack adapter or through the 5V pin or the Vin pin.
      For high current application(<1A), we recommend using the DC barrel jack adapter or Vin pin. Here, the minimum input voltage 6VDC (recommended 7-12VDC).
      Note: Barrel jack connector has reverse polarity protection where as Vin pin doesn't.
      You can also use USB or 5V pin to power up the board.
      Caution: Here, no reverse polarity protection is provided & giving high voltage could fry components on board.
      Note: USB connector has a 500mA fuse to protect PC USB port in case of a short circuit. So, make sure you doesn't use USB adapters to power up the board for high current(>500mA) application or the fuse gets blown.

    • Q
    • Is this Adruino Uno a clone or an original Arduino?

      asked by Naman Chauhan on March 20, 2017
    • A
    • Arduino UNO is 100% GENUINE ARDUINO board made in & imported from ITALY.

    • Q
    • WhyArduino running at 16MHz when it can run at 20MHz?

      asked by Chrispin on August 23, 2019
    • A
    • The first Arduino used the Atmega8 which could not run faster than 16Mhz. As the chip has been upgraded they wanted to make the boards speed compatible. Arduino is also not really intended for fast-processing (its only 8-bit anyways) so the chips are running at 16MHz.

    • Q
    • Does it come with the documents and stickers and the plastic case?

      asked by Eram on September 13, 2019
    • A
    • Product Package includes 1x Arduino UNO - R3 (Arduino-Italy),
      1 x USB A to B cable.

      Available resources are updated in productpage.

Ask a question about Arduino UNO - R3 with USB Cable (Orginal Arduino-Italy)

Report issue about the Arduino UNO - R3 with USB Cable (Orginal Arduino-Italy)

Ask a question about the Arduino UNO - R3 with USB Cable (Orginal Arduino-Italy)

Report issue about the Arduino UNO - R3 with USB Cable (Orginal Arduino-Italy)

Request price match for the Arduino UNO - R3 with USB Cable (Orginal Arduino-Italy)

Found this item with same quality and at a lower price but prefer to buy from

Please submit the url of the better price you saw. We will lauch an immediate investigation and try our best to beat the price, if it proves to be the same product. We will notify you the result by email. Thanks a lot for helping us to maintain competitive prices.

Arduino UNO - R3 with USB Cable (Orginal Arduino-Italy)