Arduino Uno Wi-Fi is the new Arduino Uno with an integrated Wi-Fi module. The board is based on the ATmega328P with an ESP8266 Wi-Fi Module integrated. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. The ESP8266 Wi-Fi Module is a self contained SoC with integrated TCP/IP protocol stack that can give access to your Wi-Fi network. (Or the device can act as an access point.) One useful feature of Uno Wi-Fi is support for OTA (over-the-air) programming, either for transfer of Arduino sketches or Wi-Fi firmware.
Note: This is 100% GENUINE ARDUINO board.
Specification of Arduino Uno Wifi:
- Digital I/O Pins: 20
- PWM Output: 6
- Power Consumption: 93 mA
- PCB Size: 53 x 68.5 mm
- Architecture:Tensilica Xtensa LX106
- Operating Voltage:3.3 V
- Flash Memory:4 MB
- RAM:8 MB instruction, 12 MB data
- Clock Speed:80 MHz
- WiFi:802.11 b/g/n 2.4 GHz
- Wake up time:< 2 ms
- Architecture: Atmel AVR 8-bit
- Operating Voltage:5 V
- Flash memory: 32 KB
- SRAM: 2 KB
- Clock Speed: 16 MHz
- Analog I/O Pins: 6
- EEPROM: 1 KB
- DC Current per I/O Pins: 40 mA
There are currently no any reviews about this product.
There are currently no any question about this product.