Stock Clearance Sale
-55 %
Model: WRL-2819
Nl6621-Y1 2.4G UART Serial to WiFi Module for Arduino bridges between serial UART and WiFi. It is based on NL6621M, a highly integrated SOC. It has a 3V3 TTL serial communication interface and its parameters can be set by AT command.
NL6621M integrates MCU, MAC, 1T1R baseband and RF transceiver w..
Rs 249.00 Rs 549.00
Stock Clearance Sale
-67 %
Model: ROB-2694
This Thumb Joystick is similar to the 'analog' joystick on PS2 (PlayStation 2) controllers. The X and Y axes are two ~10k potentiometers which control 2D movement by generating analog signals. The joystick also has a push button that could be used for special applications. When the module works, it ..
Rs 49.00 Rs 149.00
Stock Clearance Sale
-79 %
Model: ARD-2767
Brand: Sparkfun - USA
Its super small, simple & inexpensive. The Qduino Mini is perfect to embed in your electronics projects. It is arduino compatible & is fully open source. It has got a battery connector & charger built-in, & a fuel gauge that can tell you when to charge the battery!
All of the desi..
Rs 499.00 Rs 2,399.00
Stock Clearance Sale
-55 %
Model: GSM-2025
Brand: rhydoLABZ
An all-in-one arduino compatible shield from rhydoLABZ, that lets you add location-tracking, voice, text, data connectivity and data storage to your project in an adorable little package.The shield features new generation GlobalTop GPS chipset and SIM900 Quad-band GSM/GPRS engine that works on ..
Rs 1,699.00 Rs 3,799.00
Stock Clearance Sale
-23 %
Model: GSM-2022
Brand: rhydoLABZ
Introducing rhydoLABZ GSM/GPRS Shield, an all-in-one SIM900A shield that lets you add voice, text/SMS and data to your arduino project in an easy to use pluggable arduino formfactor. It is built with a stamp sized Dual Band GSM/GPRS engine - SIM900A, works on frequencies 900/ 1800 MHz. This sh..
Rs 999.00 Rs 1,299.00
Stock Clearance Sale
-29 %
Model: GSM-2023
Brand: rhydoLABZ
Introducing rhydoLABZ GSM/GPRS Shield, an all-in-one SIM800 shield that lets you add voice, text/SMS, data connectivity and Bluetooth to your arduino project in an easy to use manner. With right program running, you could just plug and play as it has got an arduino form-factor. It is built with a st..
Rs 999.00 Rs 1,399.00
Stock Clearance Sale
-43 %
Model: IC-0150
Description: TB6612FNG is a Driver IC for Dual DC motor, with output transistor in LD MOS structure with low ON-resistor. Two input signals, IN1 and IN2, can choose one of four modes such as CW, CCW, short brake, and stop mode. Features:Power supply voltage: VM=15V (Max.)Output current: Iout=1.2A(av..
Rs 78.00 Rs 138.00
Stock Clearance Sale
-65 %
Model: RAS-2592
Brand: Chineese
Description: If you want to make some fun embedded computer projects with your Pi, from your very first project, you would have wanted to breakout the Pi pins. This Extension Board will help you on this, it breaks out all those tasty power, GPIO, I2C and SPI pins from the 26 pin header onto a breadb..
Rs 69.00 Rs 199.00
Stock Clearance Sale
-35 %
Model: ARD-2642
Brand: Sparkfun - USA
The CAN-BUS Shield provides your Arduino or Redboard with CAN-BUS capabilities and allows you to hack your vehicle. This shield allows you to poll the ECU for information including coolant temperature, throttle position, vehicle speed, and engine rpms. You can also store this data or output it to a ..
Rs 1,399.00 Rs 2,149.00
Stock Clearance Sale
-68 %
Out Of Stock
Model: ARD-2573
Brand: Sparkfun - USA
The Weather Shield is an easy to use Arduino shield that grants you access to barometric pressure, relative humidity, luminosity and temperature. There are also connections on this shield to optional sensors such as wind speed, direction, rain gauge and GPS for location and super accurate timing.
..
Rs 999.00 Rs 3,099.00
Stock Clearance Sale
-37 %
Model: LIL-2489
Brand: Sparkfun - USA
Lipower - Boost Converter board is based on the incredibly versatile TPS61200 boost converter. The board is configured to be used with a LiPo battery, has solder jumper selectable 5V and 3.3V output, and an under voltage protection of 2.6V. However, the board can also be used as a general purpose bu..
Rs 749.00 Rs 1,189.00
Stock Clearance Sale
-68 %
Model: WID-2599
Brand: Sparkfun - USA
The PowerCell board is a single cell LiPo boost converter (to 3.3V and 5V) and micro-USB charger in one. The board comes with a JST connector for a single cell LiPo battery, a micro-USB connector for the 5V charge input, and selectable 3.3V and 5V output pins (labeled ‘out’). There are also two char..
Rs 499.00 Rs 1,578.00
Stock Clearance Sale
-27 %
Model: ARD-2643
Brand: Waveshare
The Motor Control Shield from Waveshare is based on the L293D motor driver IC, which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors. With dual L293D ICs, the shield lets you drive 4 DC motors or 2 stepper motors at the same time with ..
Rs 399.00 Rs 549.00
Stock Clearance Sale
-50 %
Model: RAS-2591
Brand: Waveshare
Description: RPi Camera (E) is a Raspberry Pi Camera Module that supports night vision. It is compatible with all revisions of the Pi. Powered with a 5 megapixel OV5647 sensor, its best resolution is 1080p.
The IR LED board that helps the nigh vision function has onboard photoresistor, the ambien..
Rs 899.00 Rs 1,799.00
Stock Clearance Sale
-50 %
Model: RAS-2590
Description: RPi Camera (C) is a Raspberry Pi compatible camera module with fixed-focus, supports all revisions of the Pi. It works on a 5 megapixel OV5647 sensor in a fixed-focus module powerfull enough to capture stills in 2592 x 1944 resolution. Supports 1080p30, 720p60 and 640x480p60/90 video re..
Rs 399.00 Rs 799.00