OLED Expansion Board for Onion Omega adds a low-power 0.96" monochrome display to Omega. With a resolution of 128×64, it is used to display text, images and even animations. This Expansion Board is very useful for displaying status information, web data and small logos. 21 characters can fit on each..
The Realtek Ameba Board from Realtek, an IoT solution inside the familiar Arduino form factor. The Ameba Board supports WiFi, GPIO, NFC, I2C, UART, SPI, PWM and ADC operations, and can support Ethernet via Arduino-compatible headers. Ameba Board’s multiple interface options will be able to connect w..
SparkFun Lumenati 90R is a small quarter-circle board equipped with three APA102C LEDs and a single mounting position. The 90R board has been specifically designed to be daisy-chained with other Lumenati boards. The APA102C LEDs on each board with numbers indicating their position in the sequence to..
The CY7C65213 USB to UART serial breakout is designed to provide users with a means to access all available I/O pins on the IC, and to provide a 6-pin UART header that is compatible with other SparkFun breakout boards. This breakout has a microUSB connector and other support circuitry to get the IC ..
5V/2A Ac-DC Adapter with micro usb cable (TC-50) can be used to charge mobile phone or other small electronic devices via USB connection (2A) simultaneously. Universal compatibility with wide range of devices like SmartPhones, Tablet PC, iPhone, iPad, MP4 Players, PSP, GPS, BlueTooth devices, Raspbe..
WeMos- D1 R2 WiFi ESP8266 Development Board is programmable via Arduino IDE. This is an ESP8266 based WiFi enabled microprocessor unit on a Arduino-UNO footprint. That means the board looks and works (in most cases) like an UNO. Several shields, sensors and output devices that are manufactured for t..
AlphaBot2 robot kit is designed to use with an Arduino compatible controller (not included). It features rich common robot functions including line tracking, obstacle avoiding, ultrasonic ranging, infrared remote control, Bluetooth communication, etc.
AlphaBot2 Features:
AlphaBot2 employs a 2-laye..
JustBoom DAC HAT is a plug-and-play, high-resolution, digital-to-analog converter for the Raspberry Pi. Simply stack the plug-and-play add-on board (HAT) onto your Raspberry Pi A+, B+, 2B or the new 3B, and it will be ready to use immediately.
JustBoom designed the Raspberry Pi DAC HAT to be simp..
SparkFun ESP32 Thing Power Control Shield, enables the ESP32 Thing to switch up to 5A of a DC load. With a default voltage range of 5–28V DC, power can be connected to this shield in one of two ways. The first is the barrel connector, but with a maximum current rating of 2.5A (designed for light loa..
The STEMTera is an innovation in breadboard history. It is the first breadboard with an Arduino-compatible hardware suite built in that works with thousands of shields. With ATmega16U2/32U2 pins exposed, native USB projects can be easily developed using the LUFA framework. The STEMTera also features..
This is the SparkFun ESP8266 Thing Dev Board — a development board that has been solely designed around the ESP8266, with an integrated FTDI USB-to-Serial chip. The ESP8266 is a cost-effective and very capable WiFi-enabled microcontroller. Like any microcontroller, it can be programmed to blink LEDs..
True Color RGB Led Hat For Raspberry Pi can be easily attached on top of the Raspberry Pi to display colorful effect, and controlled by only one signal pin. It have onboard 4 × 8 RGB LED. The controller used in this module is WS2812B. WS2812B is an intelligent LED controller of which the control cir..
Core2530 (B) is a ZigBee module based on CC2530F256, and the extension interface is compatible with XBee. Basically this module can be used in two aspects. One is develop application with the provided firmware. Combined with the provided firmware, this is a simple ZigBee wireless UART module, just a..
The 3.2 Inch Touch Display(C) provides you with the ability to create a standalone device that can be utilized as a custom tablet or an all-in-one interactive interface for a future project using using STM32 Open series. It is 320*240 DOTS Multicolor Graphic LCD, with touch screen and stand-al..
4" HDMI Touch Screen LCD(IPS) for Raspberry Pi is designed for Raspberry Pi(except the Pi 1 model B or Pi Zero, which requires an HDMI cable). 4" RPi LCD (A) is an ideal alternative solution for HDMI monitor. Combined with portable power, this display module is the most convenient human-machine int..