This is a black/white bicolor LCD display module with embedded memory, 1.3inch diagonal, 144x168 resolution, communicating via SPI interface. It features lower power consumption compared to normal LCDs, and higher refresh rate compared to e-Papers without "ghosting" issue.
Features:
144x168..
The Raspberry Pi Power over Ethernet HAT is a small accessory for the Raspberry Pi computer. It can only be used with the Raspberry Pi 3 Model B+.The PoE HAT allows to power Raspberry Pi using Power over Ethernet–enabled networks. For this product to be used, the network it is connected to, needs to..
--
0.96 inch OLED display module can be interfaced with any microcontroller using IIC protocols. The package includes display board,display, 4 pin male header presoldered to board. OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic fi..
The Particle Argon is an IoT development kit that allows you to connect your mesh network to Wi-Fi. With the Nordic nRF52840 SoC and an ESP32 you have all the power of an ARM Cortex M4 with OpenThread mesh networking, Wi-Fi (b/g/n), NFC, plenty of GPIOs, LiPo charging and more. The board is designed..
The TPS763xx family of low-dropout (LDO) voltage regulators offers the benefits of low-dropout voltage, low-power operation, and miniaturized packaging. These regulators feature low dropout voltages and quiescent currents compared to conventional LDO regulators. Offered in a 5-pin, small outline int..
The SN6501DBVR is a monolithic oscillator/power-driver, specifically designed for small form factor, isolated power supplies in isolated interface applications. The drives a low-profile, center-tapped transformer primary from a 3.3-V or 5-V DC power supply. The secondary can be wound to provide any ..
LoRa stands for Long-Range, referring to a modulation technique whose speciality is low power transmission of small data packets perfect for Internet of Things applications. Using either point-to-point radio or LoRaWAN you can send data from a node in a remote location back to your base s..
The MP3 Trigger board is built to make MP3 sound integration easier than ever. The board has 18 external trigger pins that will directly trigger pre-selected MP3 tracks, and a full-duplex serial control port that provides full transport control, remote triggering for up to 256 tracks, and fast real-..
The LilyPad Light Sensor is a sewable breakout board with an ALS-PT19 light sensor built in and ready to use right away. Each sensor outputs voltage between 0V and 3.3V depending on the level of ambient light shining on it. As more light is applied on the sensor, more current will flow from the boar..
The WiFi IR Blaster combines an ESP8266 – a powerful WiFi/microcontroller SoC –with IR emitters and receivers. With built-in WiFi support, the ESP8266 can be programmed to provide an interface between HTTP, MQTT, TCP, and infrared-controlled devices. This module equips the ESP8266 with a crystal, 4..
The ISO3080 IC is an isolated full- duplex differential line drivers and receivers. These are ideal for long transmission lines because the ground loop is broken to allow for a much larger common-mode voltage range. The symmetrical isolation barrier of the device is tested to provide 2500 VRMS of is..
Joystick for micro:bit adds arcade controls to the micro:bit, makes it possible to turn the micro:bit into a mini game console. There's onboard buzzer to play music and game background effect. It is powered from a 14500 Li-ion battery (not included), conversely, it allows to charge the battery ..
Tiny RTC Module, for Arduino, contains a DS1307 real-time clock IC is a lowpower, full binary-coded decimal (BCD) clock/calendar plus 56 bytes of SRAM. The clock/calendar provides seconds, minutes, hours, day, date, month, and year information. It's one of the easiest to use RTCs out there, with Ard..
5V/3A Ac-DC Adapter with micro usb cable (TC-70) can be used to charge mobile phone or other small electronic devices via USB connection (3A) simultaneously. Universal compatibility with wide range of devices like SmartPhones, Tablet PC, iPhone, iPad, MP4 Players, PSP, GPS, BlueTooth devices, Raspbe..
The MKR Proto Shield is a prototyping shield designed for MKR board. This shield easily plugs onto MKR using its provided female/male headers, and offers a duplicate breakout for each pin on the board along with many solderable through-holes on a standard 0.1” grid (2.54mm).
Features of Mkr Proto..