Menu
Your Cart

1.14 inch LCD Display Module , 240x135 (Waveshare)

1.14 inch LCD Display Module , 240x135  (Waveshare)
1.14 inch LCD Display Module , 240x135  (Waveshare)
1.14 inch LCD Display Module , 240x135  (Waveshare)
1.14 inch LCD Display Module , 240x135  (Waveshare)
1.14 inch LCD Display Module , 240x135  (Waveshare)
1.14 inch LCD Display Module , 240x135  (Waveshare)
1.14 inch LCD Display Module , 240x135  (Waveshare)
1.14 inch LCD Display Module , 240x135  (Waveshare)
1.14 inch LCD Display Module , 240x135 (Waveshare)
  • Stock: Out Of Stock
  • Brand: Waveshare
  • Model: DIS-3377
  • Weight: 0.03kg
  • MPN: 18231
Rs 599.00
(Excluding GST)
  • 240x135, General 1.14inch LCD Display Module, IPS, 65K RGB
  • embedded ST7789 driver, using SPI bus
  • Comes with examples for Raspberry Pi, Arduino, STM32, etc

 

Features at a glance:

  • 240×135 resolution, 65K RGB colors, clear and colorful displaying effect
  • SPI interface, minimizes required IO pins, supports controller boards like Raspberry Pi/Arduino/STM32
  • Comes with development resources (examples for Raspberry Pi/Arduino/STM32)

Specifications:

  • Operating voltage - 3.3V/5V    
  • Resolution - 240 × 135 pixels
  • Communication Interface - 4-wire SPI  
  •  Display size - 24.91 × 14.86mm
  • Display Panel - IPS    
  • Pixel size - 0.1101 × 0.1035mm
  • Driver - ST7789    
  • Dimensions - 35.00 × 32.00mm

             

                                                              Controlled via SPI Bus

                                    Supports controller boards like Raspberry Pi/Arduino/STM32

 

  • VCC : Power (3.3V/5V input)
  • GND : Ground
  • DIN   : SPI data input
  • CLK  : SPI clock input
  • CS    : Chip selection, low active
  • DC    : Data/Command selection (high for data, low for command)
  • RST  : Reset, low active
  • BL     : Backlight

                                                             

                                                         Hardware connection

                                                         connecting with Raspberry Pi

                                                       Connecting with Arduino board

                                                     Living Example

 

                                                         Outline Dimensions

 

Package Includes:

  • 1.14inch LCD Module x1
  • PH2.0 8PIN 20cm cable x1

Downloads:

 

Note: The 0.96inch OLED consists of 1/4 yellow upper section and 3/4 blue lower section, not a regular dual-color display.

Write a review

Please login or register to review