Description: This is a simple to use, RS232 to serial base unit made by rhydoLABZ for the XBee line of products. This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. Plug the unit into the XBee Explorer, attach a RS232 cable, attach a USB Cable to power the board and you will have direct access to the serial and programming pins on the XBee unit. The board also supports DTR communication so you can reprogram and configure the XBee unit.
XBee Explorer RS232 takes care of the 3.3V regulation, 3V3 <-> 5V level conversion, signal conditioning, and basic activity indicators (Power, RSSI and DIN/DOUT activity LEDs). It translates the 5V signals to 3.3V and viseversa . All XBee pins are brought out at 2.54mm bergstrip to make it available for breadboard lovers also.
The XBee Explorer RS232 will help you reduce lot of hassles normally facing to implement Xbee Network. The module can be powered from USB Port as well as DC Adapter. The use of USB power port help us to avoid bulky external Adapter.
Note: XBee modules, RS232 cable, and power supplies sold separately
- Compatible with all XBee modules & other modules with same footprint
- Built in 3V3 Voltage regulator
- Onboard 3V3 <->5V level converter
- Status LEDs ( RX,TX,RSSI,Power)
- XBee Pins available at 2.54mm bergstrip
- USB and DC Adapter Power option
- 1 x XBee Explorer - RS232
Downloads & Downloads: