ARM LPC2129 CAN Teach YourSelf Kit

(2) 5 out of 5 stars Write reviewReport bug
  • Part No :
  • TYS-1130
  • Availability:
  • In Stock
  • Shipping :
  • Same Day
  • Weight:
  • 1.6Kg
  • Made By:
  • rhydoLABZ
  • Mfr.Part.No:
  • TYS-1130
  • Quality Rank:
  • 100/100
Price: Rs 9925 Rs 7990-19%(Tax Excl.)
Qty Discounts Off Price
1 Rs 7990
2-4 Rs 7990
5-9 Rs 7990
10+ Rs 7990
Quantity :
Description: The eDu LPC2129 is a NXP ARM7TDMI (16 & 32 bit) based LPC2129 CAN microcontroller self study kit, suitable for teaching and learning embedded system programming. This tutorial is intended to give a detailed picture of programming the Philips (NXP)  LPC2129 ARM7 microcontroller. The tutorial kit includes all necessary tools to assist you in developing various applications your self. The Philips ARM7 Microcontroller LPC21XX series is a high-performance while low-cost embedded processor. It includes several useful modules, like I2C, RTC, PWM, UART ,ADC,CAN etc. It is quite convenient for embedded system designer to use it as an all-in-one solution.



Note: The USB connector, provided on board, is only for powering.

eCee LPC2129 Development Board Features:
  • Includes Base board + Header Board
  • Compact and Ready to use design
  • Professional EMI/RFI Complaint PCB Layout Design for Noise Reduction
  • High Quality Two layer PTH PCB
Base Board Features:
  • Supports LPC2132/38/48  Header Boards
  • Includes LPC2129 Header Board with in-built CAN Module
  • No separate programmer required (On-Chip Boot loader)
  • No Separate power adapter required (USB power source)
  • Two RS-232 Interfaces (For direct connection to PC’s Serial port)
  • On Board Two Line LCD Display (2x16) (with jumper select option)
  • On Board 8 LED Interface to test Port pin (with jumper select option)
  • On Board Pot interface to ADC
  • On Board Temperature Sensor Interface
  • On Board Buzzer Interface
  • On Board 4x4 (16 Keys) Matrix Keyboard
  • On Board I2C EEPROM
  • On Board External Interrupt Button
  • On Board Connector for PWM Output
  • PWM controlled LCD backlight
  • On Board Connector for AnalogOutput
  • On Board Speaker Output
  • LF Amplifier LM 386
  • Adaptor (any standard 9-12V power supply) option
  • On Board Power LED Indicator
  • On Board Reset button
  • All Port Pins available at Berge Strip
  • On Board JTAG Connector for Debugging/Programming
  • Power Supply Reverse Polarity Protection
  • Three On Board DB9 Connectors (Two for UART and One for CAN)
  • On Board USB Connector
  • On Board 1 Amp Voltage Regulator
  • On Board Connector for regulated 3V3 output
  • On Board Connector for regulated 5V output
  • Controller Area Network (CAN) transceiver
  • Can be used as main board for developing applications
Header Board Features:
  • Easy to use DIP Package
  • Includes NXP LPC 2129 Microcontroller with in-built CAN Module
  • On Board Power LED Indicator
  • On Board JTAG Jumper
  • On Board 10 MHz Crystal Oscillator
  • On Board 32.768 KHz Crystal for RTC
  • On Board 3.3V Regulator
  • On Board 1.8V Regulator
  • On Board Power Supply de-Coupling Capacitors
  • All Port Pins available at Berge Strip
  • Header Module can be removed for developing your circuit
LPC2129 Chip Specifications:
  • NXP LPC 2129 with 10 MHz Crystal Oscillator (With Boot loader Software)
  • High Performance 32-bit ARM7TDMI-S™ CPU
  • 256 KB Programmable Flash Memory provides a minimum of 100,000 erase/write cycles and 20 years of data retention
  • 16 KB Data Memory (SRAM)
  • In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software
  • Flash programming takes 1 ms per 512 byte line. Single sector or full chip erase takes 400ms
  • Embedded ICE-RT interface enables breakpoints and watch points
  • Two interconnected CAN interfaces with advanced acceptance  filters
  • Four channel 10-bit A/D converter with conversion time as low as 2.44 us
  • Multiple serial interfaces including two UARTs , Fast I2C (400 kbits/s) and two SPIs 
  • 60MHz maximum CPU clock available from programmable on-chip Phase-Locked Loop 
  • Vectored Interrupt Controller with configurable priorities
  • Two 32-bit Timers
  • Four Capture and four Compare channels
  • PWM unit with six output pins
  • Real-time clock
  • Watch Dog Timer
  • Up to forty-six 5V tolerant general purpose I/O pins
  • Up to nine edge or level sensitive external interrupt pins
  • On-chip crystal oscillator with an operating range of 1MHz to 30MHz
  • Two low power modes -  Idle and Power-down
  • Processor wake-up from Power-down mode via external interrupt
  • Individual enable/disable of peripheral functions for power optimization
  • CPU operating voltage range of 1.65V to 1.95V and I/O power supply range of 3.0V to 3.6V
Package Includes:
Documents & Downloads:
Sort by: Recently  /  Helpful Write review

Good board

By Santhosh from Banglore, India on June 08, 2016
Its a great product especially for engineers new to CAN protocol.
Was this review helpful to you?   Yes   No

Good board

By Yohannan from Kochi, India on April 29, 2016
Enough features and documentation
Was this review helpful to you?   Yes   No

There are currently no any question about this product.

Ask a question about ARM LPC2129 CAN Teach YourSelf Kit

Report issue about the ARM LPC2129 CAN Teach YourSelf Kit



Ask a question about the ARM LPC2129 CAN Teach YourSelf Kit

Report issue about the ARM LPC2129 CAN Teach YourSelf Kit



Request price match for the ARM LPC2129 CAN Teach YourSelf Kit

Found this item with same quality and at a lower price but prefer to buy from rhydoLABZ.com?

Please submit the url of the better price you saw. We will lauch an immediate investigation and try our best to beat the price, if it proves to be the same product. We will notify you the result by email. Thanks a lot for helping us to maintain competitive prices.

ARM LPC2129 CAN Teach YourSelf Kit