Menu
Your Cart
Dear Valued Customers: We're excited to announce our move to a new website!  Existing Customers, kindly utilize the 'Forgot Password' option to update the Password. Thank you for your cooperation!

Pololu Carrier With Sharp GP2Y0A60SZLF Analog Distance Sensor

Pololu Carrier With Sharp GP2Y0A60SZLF Analog Distance Sensor
Pololu Carrier With Sharp GP2Y0A60SZLF Analog Distance Sensor
Pololu Carrier With Sharp GP2Y0A60SZLF Analog Distance Sensor
Pololu Carrier With Sharp GP2Y0A60SZLF Analog Distance Sensor
Pololu Carrier With Sharp GP2Y0A60SZLF Analog Distance Sensor
Pololu Carrier With Sharp GP2Y0A60SZLF Analog Distance Sensor
Pololu Carrier With Sharp GP2Y0A60SZLF Analog Distance Sensor
Pololu Carrier With Sharp GP2Y0A60SZLF Analog Distance Sensor
Pololu Carrier With Sharp GP2Y0A60SZLF Analog Distance Sensor
  • Stock: In Stock
  • Brand: Pololu - USA
  • Model: SEN-2676
  • Weight: 0.02kg
  • MPN: 2476
Rs 1,099
Description: The GP2Y0A60SZ distance sensor from Sharp offers a wide detection range of 4″ to 60″ (10cm to 150cm) and a high update rate of 60 Hz. The distance is indicated by an analog voltage, so only a single analog input is required to interface with the module. The sensor ships installed on a compact carrier board, which makes it easy to integrate this great sensor into your project, and is configured for 3V mode.


The GP2Y0A60SZ supports two operating modes: 5V and 3V. In 5V mode, the recommended operating voltage is 2.7 V to 5.5 V, and the output voltage differential over the full distance range is approximately 3 V, varying from around 3.6 V at 10 cm to 0.6 V at 150 cm. In 3V mode, the recommended operating voltage is 2.7 V to 3.6 V, and the output voltage differential over the full distance range is approximately 1.6 V, varying from around 1.9 V at 10 cm to 0.3 V at 150 cm. The GP2Y0A60SZ datasheet contains a plot of analog output voltage as a function of the distance for the two modes.

The only difference between the two versions is the presence or absence of a zero ohm resistor as shown in the picture above (the component location is marked by a rectangle on the silkscreen). You can convert a 5V version to 3V by removing the resistor, and you can convert a 3V version to 5V by shorting across the two pads.

NOTE: This is the 3V version

Features:
  • Operating voltage: 2.7 V to 3.6 V
  • Average current consumption: 33 mA (typical)
  • Distance measuring range: 10 cm to 150 cm (4″ to 60″)
  • Output type: analog voltage
  • Output voltage differential over distance range: 1.6 V (typical)
  • Update period: 16.5 ± 4 ms
  • Enable pin can optionally be used to disable the emitter and save power
  • Weight without header pins: 2.5 g (0.09 oz)

Dimensions:


Package Includes:
  • 1x Pololu Carrier With Sharp GP2Y0A60SZLF Analog Distance Sensor
  • 1× 4 strip of 0.1" header pins
  • 1× 4 strip of 0.1" right-angle header pins

Documents & Downloads:

 

Write a review

Please login or register to review