SparkFun Triple Axis Magnetometer Breakout - MAG3110

(1) 4 out of 5 stars Write reviewReport bug
  • Part No :
  • SEN-2589
  • Availability:
  • In Stock
  • Shipping :
  • Same Day
  • Weight:
  • 0.03Kg
  • Made By:
  • Sparkfun - USA
  • Mfr.Part.No:
  • SEN-12670
  • Quality Rank:
  • 100/100
Price:
Rs 969
(Tax Excl.)
969.0000 rhydoLABZ.com New In Stock
Quantity :

Freescale’s MAG3110 is a small, low-power, digital 3-axis magnetometer. The device can be used in conjunction with a 3-axis accelerometer to produce orientation independent accurate compass heading information. It features a standard I2C serial interface output and smart embedded functions. It’s also a tiny QFN package which isn’t very easy to play with so here is our easy to use breakout board. This board breaks out all of the pins for the MAG3110 to a standard 0.1" header and also supplies the necessary filtering capacitors so that you can easily use it in your next navigation project.

Note: You will need to use a logic level converter if you are using an Arduino Uno or similar 5V logic device. Even if 3.3V is to be supplied to the VDD, an Uno putting out 5V logic can still fry this breakout.

MAG3110 Triple Axis Magnetometer Features:

  • 1.95V to 3.6V Supply Voltage
  • 7-bit I2C address = 0x0E
  • Full Scale Range ±1000 μT
  • Sensitivity of 0.10 μT
  • Pull Up Resistor Jumper
  • Dimensions: 13.3 x 14.5 mm

MAG3110 Triple Axis Magnetometer Resources:

Sort by: Recently  /  Helpful Write review

Good

By Thilak from Kerala, India on May 26, 2016
It is a nice product. It would have been better with on board logic translation
Was this review helpful to you?   Yes   No
    • Q
    • Do i need anything extra for this board to work?

      asked by Arnav Rajesh on June 11, 2016
    • A
    • Any device with I2C interface could be used to read data from this module. Also please note that the modules comes without headers.

    • Q
    • Please let me know what headers is required to connect this to a Arduino board [UNO, mega anything is fine].

      asked by Pritam Ganguly on October 02, 2016
    • A
    • Solder female/male headers to this module and using compatible jumper wires, You can interface the module with Arduino

Ask a question about SparkFun Triple Axis Magnetometer Breakout - MAG3110

Report issue about the SparkFun Triple Axis Magnetometer Breakout - MAG3110



Ask a question about the SparkFun Triple Axis Magnetometer Breakout - MAG3110

Report issue about the SparkFun Triple Axis Magnetometer Breakout - MAG3110



Request price match for the SparkFun Triple Axis Magnetometer Breakout - MAG3110

Found this item with same quality and at a lower price but prefer to buy from rhydoLABZ.com?

Please submit the url of the better price you saw. We will lauch an immediate investigation and try our best to beat the price, if it proves to be the same product. We will notify you the result by email. Thanks a lot for helping us to maintain competitive prices.

SparkFun Triple Axis Magnetometer Breakout - MAG3110