ARM 11 Board with 7" LCD (S3C 6410)

(1) 5 out of 5 stars Write reviewReport bug
  • Part No :
  • SBC-1592
  • Availability:
  • Out of Stock
  • Shipping :
  • Same Day
  • Weight:
  • 0.9Kg
  • Made By:
  • Embest - China
  • Quality Rank:
  • 100/100
Rs 20368
(Tax Excl.)
Description: This is an S3C6410 ARM11 development board ( OK6410) bundled with a 7 " TFT LCD. This board comes with a 128MB DDR RAM, 1GB NAND Flash, WinCE / Linux / Android support, advanced Video / graphic support with 3D acceleration.

Note: This SBC kit is coming with well described English Manual (We found that most of the other ARM11 boards are coming with Chinese manuals)

  • OK6410 Core Board
  • 6 layer PCB, stable performance tested through electromagnetism
  • Samsung S3C6410 microcontroller based on the ARM1176JZF-S core, main frequency @ 533/667MHz
  • 128MB Mobile DDRram, 256MB DDRram available
  • 1GB NAND Flash
  • 12MHz,48MHz,27MHz,32.768KHz clock source
  • 5V power supply adaptable
  • Dimension: 60 x 50mm
  • OK6410 Carrier Board
  • 4 layer PCB, stable performance tested through electromagnetism
  • One reset button implemented with specific reset chip
  • 8-bit toggle switch for selecting boot mode
  • Four serial ports, including one 5-wire RS232 and three 3-wire RS232
  • One 100M Ethernet port with DM9000AE and indicators
  • One USB Host interface supporting USB1.1 protocol
  • One USB Slave (MINI-USB) interface supporting USB2.0 protocol
  • One high-speed SD card slot supporting SD Memory and SDIO
  • One WIFI expansion interface
  • Stereo audio I/O sockets
  • LCD and touch screen interface supporting 3.5”, 4.3”, 5.6”, 5.7”, 7” TFT LCD
  • One CVBS output interface (PAL/NTSC)
  • One CMOS camera connector supporting ITU-R BT601/656 8-bit mode
  • Built-in RTC (Real Time Clock) with back-up battery
  • One JTAG interface using 2*10 pin connector
  • One Infrared receiver
  • Four user LED's
  • One Buzzer
  • Three 2*10 pin expansion interfaces. One of the expansion interface contains 1 x GND, 1 x DA, 8 x AD, 10 x IO, 1 x SPI, One for connecting 8 x 8 matrix keypad, the other one can be connected to the three TTL serial ports and 6 I/Os .
  • Dimension: 145 x 105mm
  • Embedded Linux
  • Kernel: Linux 3.0.1, 100% open source
  • BootLoader: U-BOOT-1.1.6, supporting USB2.0 download. 100% open source
  • File System: cramfs and yaffs2 provided
  • Grapical Interface: Qtopia 2.2.0, Qtopia 4.4.3 and QT4.7, runtime-switchable
  • WinCE
  • Version: WinCE 6.0 R3 (BSP provided as source code)
  • BootLoader: E-BOOT supporting USB 2.0 download

  • Android
  • Bootloader: U-boot-1.1.6, source code provided
  • Kernel: Linux-2.6.29
  • Kernel: Linux-
Package Contents:
  • 1x OK6410-CORE ARM11 System on Module
  • 1x OK6410 development board
  • 1x 7" LCD with touch panel and stylus
  • 1x serial port cable
  • 1x USB cable
  • 1x Ethernet cable
  • 1x 5V power supply
  • 1x DVD
Sort by: Recently  /  Helpful Write review

Apiepcration for thi

By Jeanette from aLkPFrZ70Z, gsHx4Dzm on May 07, 2016
Got a lot to work as there is no real documentation available for this product. Bt that wont be an issue here, as rhydolabz gives the best tech support everytime
Was this review helpful to you?   Yes   No

There are currently no any question about this product.

Ask a question about ARM 11 Board with 7" LCD (S3C 6410)

Report issue about the ARM 11 Board with 7" LCD (S3C 6410)

Ask a question about the ARM 11 Board with 7" LCD (S3C 6410)

Report issue about the ARM 11 Board with 7" LCD (S3C 6410)

Request price match for the ARM 11 Board with 7" LCD (S3C 6410)

Found this item with same quality and at a lower price but prefer to buy from

Please submit the url of the better price you saw. We will lauch an immediate investigation and try our best to beat the price, if it proves to be the same product. We will notify you the result by email. Thanks a lot for helping us to maintain competitive prices.

ARM 11 Board with 7" LCD (S3C 6410)