Menu
Your Cart
Dear Valued Customers: We're excited to announce our move to a new website!  Existing Customers, kindly utilize the 'Forgot Password' option to update the Password. Thank you for your cooperation!

Dagu - Wild Thumper High Power Switch

Dagu - Wild Thumper High Power Switch
Dagu - Wild Thumper High Power Switch
Dagu - Wild Thumper High Power Switch
Dagu - Wild Thumper High Power Switch
Dagu - Wild Thumper High Power Switch
Dagu - Wild Thumper High Power Switch
Dagu - Wild Thumper High Power Switch
Dagu - Wild Thumper High Power Switch
Dagu - Wild Thumper High Power Switch
  • Stock: In Stock
  • Brand: Dagu
  • Model: ROB-2215
  • Weight: 0.05kg
  • MPN: RS003HP
Rs 1,299
Description: This is the "High Power Switch" from DAGU. Originally designed for the "Wild Thumper" robot chassis's it is a very versatile switch that can be used with any robot that draws more than the 2-3A that most small switches can handle.

This switch will work with batteries from 6V to 24V with a maximum voltage of 32V so you can charge your 24V batteries without damaging the switch. Without any heatsinking this switch will handle 10A easily. Mounted on a CPU heatsink with heat transfer compound and a cooling fan and this switch will handle up to 60A continuous!! The FET's are fully insullated to simplify mounting requirements. To make the switch as robot friendly as possible we have now added a socket for an external manual switch. This allows another switch to be more conveniently mounted. Simply leave the on-board switch in the "off" position.



A digital input allows the switch to be controlled by a processor. Simply connect the grounds and apply a voltage of at least 1V to the digital input to turn the switch on. This gives a robot the ability to turn itself off after recharging it's battery.The Wild Thumper High Power Switch is an accessory that conveniently cuts power supply from the LiPo battery.

The differentiating part about this accessory is that it is designed to handle the High Currents that pass between the LiPo and the High Power H bridge in the Wild Thumper (2 x 15A). The switch is designed to protect both the LiPo and the Electronics.



Specifications:
  • Battery voltage: 6V -20V
  • Current rating: 10A continuous - No heat-sink
  • Current rating: 30A continuous - Chassis used as heat-sink with heat transfer compound.
  • Current rating: 60A continuous - Heavy duty heat-sink, fan and heat transfer compound.
Documents:Note: If the current passing through the switch will be Higher than 10A, the switch should be mounted on the Heat sink.
 

Write a review

Please login or register to review