This procduct is discontinued by the manufacturer. Latest version is available in our site : LIDAR-Lite V3
This is the LIDAR-Lite v2, a compact high performance optical distance measurement sensor from PulsedLight. The LIDAR-Lite “Blue Label” is ideal when used in drone, robot, or unmanned vehicle situations where you need a reliable and powerful proximity sensor but don’t possess a lot of space. All you need to communicate with this sensor is a standard I2C or PWM interface. With everything connected the LIDAR-Lite v2, with its range of up to 40 meters, will be yours to command!
Each LIDAR-Lite v2 features an edge emitting, 905nm (75um, 1 watt, 4 mrad, 14mm optic), single stripe laser transmitter and a surface mount PIN, 3° FOV with 14mm optics receiver. The second version of the LIDAR-Lite still operates at 5V DC with a current consumption rate of <100mA at continuous operation. On top of everything else, the LIDAR-Lite has an acquisition time of only 0.02 seconds or less and can be interfaced via I2C or PWM.
The LIDAR-Lite v2 has received a number of upgrades from the previous version. With the implementation of a new signal processing architecture, LIDAR-Lite v2 can operate at measurement speeds of up to 500 readings per second offering greater resolution for scanning applications. Additionally, the LIDAR-Lite v2 has had its I2C communications improved to operate at 100 kbits/s or 400 kbits/s with you, the user, able to assign your own addressing! Just in case you are wondering: yes, the LIDAR-Lite v2 is compatible with its previous version in all primary functions and their compatibility will extend into the next version and beyond.
Note: The LIDAR Lite is designated as Class 1 during all procedures of operation, however operating the sensor without its optics or housing or making modifications to the housing can result in direct exposure to laser radiation and the risk of permanent eye damage. Direct eye contact should be avoided and under no circumstances should you ever stare straight into the emitter.
- Range: 0-40m Laser Emitter
- Accuracy: +/- 0.025m
- Power: 5V DC
- Current Consumption: <100mA continuous operation
- Acquisition Time: < 0.02 sec
- Rep Rate: 1-500Hz
- Interface: I2C or PWM
- 1 x LIDAR-Lite v2 Laser Module
- 1 x LIDAR-Lite Cable
- Length: 21 mm
- Width: 48.3 mm
- Height: 35.5 mm
Documents & Downloads:
There are currently no any reviews about this product.