LPC2148 ARM Header Board

(1) 5 out of 5 stars Write reviewReport bug
  • Part No :
  • HEA-1103
  • Availability:
  • In Stock
  • Shipping :
  • Same Day
  • Weight:
  • 0.1Kg
  • Made By:
  • rhydoLABZ
  • Mfr.Part.No:
  • HEA-1103
  • Quality Rank:
  • 100/100
  • Warranty:
  • 3 Month
Rs 1080
(Tax Excl.)
Qty Discounts Off Price
1 Rs 1080
2-4 Rs 1026
5-9 Rs 1004
10+ Rs 972
Quantity :
Description: The LPC2148 ARM Header Board is a Low Cost Board that can be used to quickly evaluate and demonstrate the capabilities of  NXP LPC2148 (ARM7TDMI) microcontroller. The Header board is designed as  DIP package with access to all Port pins for external connection.The LPC2148 ARM Header Board consists all basic components required to function the microcontroller. The board is populated with  voltage regulators ,RTC crystal ,Main Crystal and necessary de-coupling  capacitors. Simply give 5V to the header , it will starts to execute your code!

LPC2148 ARM Header Board Features:
  • Easy to use DIP Package
  • Includes NXP LPC2148 Microcontroller with onchip USB Peripheral
  • On Board Power LED Indicator
  • On Board JTAG Jumper
  • On Board 12 MHz Crystal Oscillator
  • On Board 32.768 KHz Crystal for RTC
  • On Board 3.3V Regulator
  • On Board Power Supply de-Coupling Capacitors
  • All Port Pins available at Berge Strip
LPC2148 Chip Specification:
  • NXP LPC2148 with 12 MHz Crystal Oscillator (With Boot loader Software)
  • High Performance 32-bit ARM7TDMI-S™ CPU
  • 512 KB Programmable Flash Memory provides minimum of 10,000   erase/write cycles and 10 years of data-retention.
  • 32 KB Data Memory (SRAM)
  • In-System Programming/In-Application Programming (ISP/IAP) via on-chip boot loader software.
  • Single Flash sector or full chip erase in 400 ms and programming of 256 bytes in 1 ms.
  • Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-   chip RealMonitor software and high-speed tracing of instruction execution.
  • USB 2.0 Full-speed compliant device controller with 2 KB of endpoint RAM.
  • Provides 8KB of on-chip RAM accessible to USB by DMA
  • Two 10-bit ADCs provide a total of 14 analog inputs, with conversion times as low as 2.44 us per  channel.
  • Single 10-bit DAC provides variable analog output.
  • Two 32-bit Timers/External event counters.
  • Four Capture and four Compare channels.
  • PWM unit with six output pins.
  • Low power Real-time clock with independent power and dedicated 32 kHz clock input.
  • Multiple serial interfaces including two UARTs, two Fast I2C (400 kbit/s), SPI™ and SSP   with buffering and variable data length capabilities.
  • Vectored interrupt controller with configurable priorities and vector addresses.
  • Up to 45 of 5 V tolerant general purpose I/O pins.
  • Up to nine edge or level sensitive external interrupt pins.
  • 60 MHz maximum CPU clock available from programmable on-chip Phase-Locked  Loop (PLL) with settling time of 100us.
  • On-chip integrated oscillator operates with external crystal in range of 1 MHz to 25 MHz
  • Power saving modes include Idle and Power-down.
  • Individual enable/disable of peripheral functions.
  • Processor wake-up from Power-down mode via external interrupt.
  • Single power supply chip with Power-On Reset (POR) and Brown-Out Detection (BOD:
  • CPU Operating Voltage range of 3.0 V to 3.6 V
Package includes:
  • 1x LPC2148 ARM Header Board
Sort by: Recently  /  Helpful Write review

By Chirag Prajapati from N/A on November 23, 2014
I purchased this last week. I need schematics. the link shown above is not working.
Was this review helpful to you?   Yes   No
    • Q
    • How to burn the code in it?

      asked by Akhil Pillai on March 29, 2016
    • A
    • You can use a CP2102 Basic or FTDI Basic to connect the header board to PC. Connect the RESET pin of header to the DTR pin of the basic breakout, the Port 0 UART pins (P0.0 & P0.1) of the header with the RX and TX pins of the breakout and the ISP Pin (P0.14) to ground. Now the connections are all set, connect your basic breakout to your PC and you can load the hex code using the Flash Utility Tool or Flash Magic on Windows and LPC2K_PGM on Linux

      rhydoLABZ 'ARM LPC2148 USB Development Board' houses the same LPC2148 Header board. It is a complete development package for the LPC2148

Ask a question about LPC2148 ARM Header Board

Report issue about the LPC2148 ARM Header Board

Ask a question about the LPC2148 ARM Header Board

Report issue about the LPC2148 ARM Header Board

Request price match for the LPC2148 ARM Header Board

Found this item with same quality and at a lower price but prefer to buy from rhydoLABZ.com?

Please submit the url of the better price you saw. We will lauch an immediate investigation and try our best to beat the price, if it proves to be the same product. We will notify you the result by email. Thanks a lot for helping us to maintain competitive prices.

LPC2148 ARM Header Board