LPC2138 ARM Header Board

(3) 4.33 out of 5 stars Write reviewReport bug
  • Part No :
  • HEA-1104
  • Availability:
  • In Stock
  • Shipping :
  • Same Day
  • Weight:
  • 0.1Kg
  • Made By:
  • rhydoLABZ
  • Mfr.Part.No:
  • HEA-1104
  • Quality Rank:
  • 100/100
  • Warranty:
  • 3 Month
Rs 1040
(Tax Excl.)
Qty Discounts Off Price
1 Rs 1040
2-4 Rs 988
5-9 Rs 967
10+ Rs 936
Quantity :

The LPC2138 ARM Header Board is a Low Cost Board that can be used to quickly evaluate and demonstrate the capabilities of  NXP LPC2138 (ARM7TDMI) microcontroller. The Header board is designed as  DIP package with access to all Port pins for external connection.The LPC2138 ARM Header Board consists all basic components required to function the microcontroller. The board is populated with  voltage regulators ,RTC crystal ,Main Crystal and necessary de-coupling  capacitors. Simply give 5V to the header , it will starts to execute your code!

Header Board Features:

  • Easy to use DIP Package
  • Includes NXP LPC 2138 Microcontroller
  • On Board Power LED Indicator
  • On Board JTAG Jumper
  • On Board 10 MHz Crystal Oscillator
  • On Board 32.768 KHz Crystal for RTC
  • On Board 3.3V Regulator
  • On Board Power Supply de-Coupling Capacitors
  • All Port Pins available at Berge Strip

LPC2138  Chip Specification:

  • NXP LPC2138 with 10 MHz Crystal Oscillator (With Boot loader Software)
  • High Performance 32-bit ARM7TDMI-S™ CPU
  • 512 KB Programmable Flash Memory provides minimum of  10,000 erase/write cycles and 10 years of data-retention.
  • 32 KB Data Memory (SRAM)
  • In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader  software.
  • Single Flash sector or full chip erase in 400 ms and 256 bytes programming in 1 ms.
  • EmbeddedICE  and Embedded Trace interfaces offer real-time debugging with the on-chip RealMonitor™ software and high speed tracing of instruction execution.
  • Two 8-channel 10-bit A/D with conversion times as low as 2.44 us per channel.
  • Single 10-bit D/A converter provide variable analog output.
  • Two 32-bit Timers/External event counters.
  • Four Capture and four Compare channels.
  • PWM unit with six output pins.
  • Low power Real-time clock with independent power and dedicated 32 kHz clock input.
  • Multiple serial interfaces including two UARTs, two Fast I2C (400 kbit/s), SPI™ and SSP with buffering and variable data length capabilities.
  • Vectored interrupt controller with configurable priorities and vector addresses.
  • Up to 47 of 5 V tolerant general purpose I/O pins.
  • Up to nine edge or level sensitive external interrupt pins.
  • 60 MHz maximum CPU clock available from programmable on-chip Phase-Locked Loop (PLL) with settling time of 100us.
  • On-chip integrated oscillator operates with external crystal in range of 1 MHz to 30 MHz or with external oscillator from 1 MHz to 50 MHz.
  • Power saving modes include Idle and Power-down.
  • Individual enable/disable of peripheral functions.
  • Processor wake-up from Power-down mode via external interrupt or Real-time Clock.
  • Single power supply chip with Power-On Reset (POR) and Brown-Out Detection (BOD)
  • CPU Operating Voltage range of 3.0 V to 3.6 V

Package includes:

  • 1x LPC2138 ARM Header Board


Sort by: Recently  /  Helpful Write review

Good for prototyping

By Sarath from Karnataka, India on August 13, 2016
Nice product.
The stick series is even more attractive QSB
1 of 2 people found this review helpful
Was this review helpful to you?   Yes   No

Awesome product from rhydolabz

By rajesh nair from N/A on June 28, 2016
awesome product ,good design ,good customer support,easy to learn resources
1 of 2 people found this review helpful
Was this review helpful to you?   Yes   No

Good Product

By Manu from Hariyana, India on April 20, 2016
Good design & is breadboard compatible
3 of 4 people found this review helpful
Was this review helpful to you?   Yes   No
    • Q
    • We bought a LPC2138 Arm Header Board -
      OLD Board: 10MHz crystal + 32768 oscillator (32768 embossed on it)
      NEW Board: 12MHz crystal + KDS1F oscillator?
      Why change from 10 to 12MHz crystal on New board?

      asked by Ravi Srinivasan on August 02, 2016
    • A
    • Newly produced LPC2138 boards has got a change in their crystal value because we wanted to bring both LPC2138 & LPC2148 boards to a common working platform with the highest possible working frequency. Feel free to change the PLL multiplier & divider to meet user requirements.
      Still if you are not satisfied, please let us know while placing order with us so that we could revert the crystal back to 10MHz.

Ask a question about LPC2138 ARM Header Board

Report issue about the LPC2138 ARM Header Board

Ask a question about the LPC2138 ARM Header Board

Report issue about the LPC2138 ARM Header Board

Request price match for the LPC2138 ARM Header Board

Found this item with same quality and at a lower price but prefer to buy from rhydoLABZ.com?

Please submit the url of the better price you saw. We will lauch an immediate investigation and try our best to beat the price, if it proves to be the same product. We will notify you the result by email. Thanks a lot for helping us to maintain competitive prices.

LPC2138 ARM Header Board