ARM7 Stick - LPC2148

(1) 5 out of 5 stars Write reviewReport bug
  • Part No :
  • QSB-2197
  • Availability:
  • In Stock
  • Shipping :
  • Same Day
  • Weight:
  • 0.1Kg
  • Made By:
  • rhydoLABZ
  • Mfr.Part.No:
  • QSB-2197
  • Quality Rank:
  • 100/100
Price:
Rs 1299
(Tax Excl.)
Quantity :
Description: The Stick Series quick start boards from rhydoLABZ are primarily intended to be used as a development system for 64-pin ARM Controllers (LPC2129/38/48), which can also be used as stand-alone devices. Over the last few years, the ARM architecture has become the most pervasive 32-bitarchitecture in the world of embedded electronics while LPC2148/38/29 still being the most widely used in ARM7 family. They come with many inbuilt peripherals making them more efficient and a reliable option for the beginners as well as high end application developers.



rhydoLABZ LPC2148 Stick consists of all basic components required to quickly evaluate and demonstrate the capabilities of NXP LPC2148 (ARM7TDMI) microcontroller. LPC2148 is a single-chip 16/32-bit RISC Microcontroller with 512KB on-chip Flash ROM with In-System Programming (ISP) and In-Application Programming (IAP) 32KB RAM having Interrupt Controller, Two 10bit ADCs with 14 channels, USB 2.0 Full Speed Device Controller, Two UARTs, one with full modem interface. Two I2C serial interfaces, Two SPI serial interfaces Two 32-bit timers, Watchdog Timer, PWM unit, Real Time Clock with optional battery backup, Brown out detect circuit General purpose I/O pins. CPU clock up to 60 MHz, On-chip crystal oscillator and On-chip PLL.



The Stick board is designed and populated with USB connector, voltage regulator, RTC crystal, Main Crystal and necessary de-coupling capacitors in a breadboard compatible formfactor  with access to all Port pins for external connection. The voltage regulation circuitry of the stick is designed on LD1117 LDO regulator, generating 3V3 for the controller. Power supply input can be either from the VCC pinout or the USB Supply (Use J1 for appropriate power input selection). The design also includes a reset switch to avoid programming pitfalls and to manually bring back the system to the initialization mode. LPC2148 has inbuilt ISP which means we can program it within the system using the USB interface.


NOTE: The LPC2148 Stick comes with pre-programmed bootloader, can be programmed using USB-UART interface available on-board. Also, the board can be powered using the same USB connector.


NOTE: Form-factor & pin-out our ARM Stick Quick-start boards are entirely different from that of our ARM header boards.

Stick Features:
  • Breadboard Compatible design
  • Onboard LDO regulator for 3V3 Supply
  • USB powered or externally powered
  • On board USB to Serial converter
  • On board LPC2148 loaded with bootloader code
  • Access to all Port pins for external connection
  • Push button to hardware reset the controller
  • Automatic ISP entry mode (via Jumpers - J4 & J5)
  • 12MHz Crystal for system clock and 32kHz Crystal for onchip RTC
  • USB interface for Serial communication and Programming
  • JTAG connector with 2x5 pin layout for programming/debugging
  • Jumper pins to switch the USB interface between MCU USB pins and UART pins
  • Programmable via USB interface and JTAG interface
  • RTC battery backup pins brought out via protection diodes
  • High Quality PTH PCB with printed legends  for easy hardware troubleshooting
  • Perfect solution for developing USB peripherials
  • Power Indication LED
LPC2148 Key Features:
  • 16/32-bit ARM7TDMI Microcontroller in a tiny LQFP64 package
  • 40 kB of on-chip static RAM and 512 kB of on-chip flash memory. 128-bit wide interface/accelerator enables high-speed 60 MHz operation
  • In-System Programming/In-Application Programming (ISP/IAP) via on-chip boot loader software. Single flash sector or full chip erase in 400ms and programming of 256 B in 1 ms
  • USB 2.0 full-speed compliant device controller with 2 kB of endpoint RAM
  • Low power Real-Time Clock (RTC) with independent power and 32 kHz clock input
Specification:
  • Input Voltage: 4.5V ~ 6.5V
  • Recommended Voltage input: 5V
  • Current Draw: 500mA @5V
  • Dimensions: 64.5 x 31.5 MM
Package Includes:
  • 1x LPC2148 Stick
  • 4x Jumper
Downloads:

NOTE: Stick needs a micro USB cable or a JTAG ribbon cable to program/debug the controller, which is not included in this package. You could have the micro USB cable for yourself from here.

Sort by: Recently  /  Helpful Write review

By Arun Singh from N/A on February 19, 2016
This is a better and versatile board compared to your previous header boards.
The only comment that I wanted to make is that this has a slightly different formfactor compared to your header board, making it non compatible with your main development board.
Was this review helpful to you?   Yes   No
    • Q
    • I am a beginner in programming and want know if you provide any sample codes or tutorials to learn ARM?
      I do not have any guide or teacher to teach programming.

      asked by Sameer Rajarshi on July 13, 2016
    • A
    • If that is the case, please check out the below link.

      http://www.rhydolabz.com/wiki/?p=6141

      This tutorial covers almost all peripherals included in LPC2148 mcu.
      After going through this, still if you are having doubts, then drop those queries to support@rhydolabz.com

Ask a question about ARM7 Stick - LPC2148

Report issue about the ARM7 Stick - LPC2148



Ask a question about the ARM7 Stick - LPC2148

Report issue about the ARM7 Stick - LPC2148



Request price match for the ARM7 Stick - LPC2148

Found this item with same quality and at a lower price but prefer to buy from rhydoLABZ.com?

Please submit the url of the better price you saw. We will lauch an immediate investigation and try our best to beat the price, if it proves to be the same product. We will notify you the result by email. Thanks a lot for helping us to maintain competitive prices.

ARM7 Stick - LPC2148