ARM LPC2138 Quick Start Board

(1) 5 out of 5 stars Write reviewReport bug
  • Part No :
  • QSB-1102
  • Availability:
  • Out of Stock
  • Shipping :
  • Same Day
  • Weight:
  • 0.5Kg
  • Made By:
  • rhydoLABZ
  • Mfr.Part.No:
  • QSB-1102
  • Quality Rank:
  • 100/100
  • Warranty:
  • 3 Month
Price:
Rs 1775
(Tax Excl.)
Qty Discounts Off Price
1 Rs 1775
2-4 Rs 1686
5-9 Rs 1651
10+ Rs 1598
Description: The ARM LPC2138 Quick Start Board is a Low Cost ARM Development Board that can be used to quickly evaluate and demonstrate the capabilities of  NXP LPC2138 (ARM7TDMI) microcontroller. The QsLPC2138 board is designed to work as a Project board with access to all Port pins for external connection. The ARM LPC2138 Quick Start Board  consists of a base board and a header board with microcontroller. The ARM Development board is populated with optimum components and is ideally suitable for Students as well as professionals.

Base Board Features:
  • Compact and Ready to use design
  • Professional  EMI/RFI Complaint PCB Layout Design for Noise Reduction
  • High Quality Two layer PTH PCB
  • Supports ARM LPC2132 / LPC2138 / LPC2129 / LPC2148* Header Boards
  • Includes ARM LPC2138 Header Board
  • No separate programmer required (On-Chip Boot loader)
  • No Separate power adapter required (USB power source)
  • Screw terminal for External power Supply
  • Power Supply range of 7V to 20V
  • RS-232 Interface (MAX3232) for direct connection to PC’s serial port (COM 0)
  • On Board TTL to RS232 Converter (COM 1)
  • On Board Power LED Indicator
  • On Board LED Connected via Jumper to I/O pin
  • On Board Reset button
  • All Port Pins available at Berge Strip and at Round Machine-cut female connector
  • On Board ARM JTAG Connector for Debugging/Programming
  • Can be used as header board for developing applications
  • Power Supply Reverse Polarity Protection
  • On Board 1 Amp Voltage Regulator
  • On Board Connector for regulated 3V3 output for your application

LPC2138 Header Board Features:

  • Easy to use DIP Package
  • Includes ARM LPC2138 Microcontroller
  • On Board Power LED Indicator
  • On Board ARM JTAG Jumper
  • On Board 10 MHz Crystal Oscillator
  • On Board 32.768 KHz Crystal for RTC
  • On Board 3.3V Regulator
  • On Board Power Supply de-Coupling Capacitors
  • All Port Pins available at Berge Strip
  • Header Module can be removed for developing your circuit

LPC2138  Chip Specification:

  • NXP LPC2138 with 10 MHz Crystal Oscillator (With Boot loader Software)
  • High Performance 32-bit ARM7TDMI-S™ CPU
  • 512 KB Programmable Flash Memory provides minimum of 10,000 erase/write cycles and 10 years of data-retention.
  • 32 KB Data Memory (SRAM)
  • In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software.
  • Single Flash sector or full chip erase in 400 ms and 256 bytes programming in 1 ms.
  • EmbeddedICE  and Embedded Trace interfaces offer real-time debugging with the on-chip RealMonitor™ software and high speed tracing of instruction execution.
  • Two 8-channel 10-bit A/D with conversion times as low as 2.44 us per channel.
  • Single 10-bit D/A converter provide variable analog output.
  • Two 32-bit Timers/External event counters.
  • Four Capture and four Compare channels.
  • PWM unit with six output pins.
  • Low power Real-time clock with independent power and dedicated 32 kHz clock input.
  • Multiple serial interfaces including two UARTs, two Fast I2C (400 kbit/s), SPI™ and SSP with buffering and variable data length capabilities.
  • Vectored interrupt controller with configurable priorities and vector addresses.
  • Up to 47 of 5 V tolerant general purpose I/O pins.
  • Up to nine edge or level sensitive external interrupt pins.
  • 60 MHz maximum CPU clock available from programmable on-chip Phase-Locked Loop (PLL) with settling time of 100us.
  • On-chip integrated oscillator operates with external crystal in range of 1 MHz to 30 MHz or with external oscillator from 1 MHz to 50 MHz.
  • Power saving modes include Idle and Power-down.
  • Individual enable/disable of peripheral functions.
  • Processor wake-up from Power-down mode via external interrupt or Real-time Clock.
  • Single power supply chip with Power-On Reset (POR) and Brown-Out Detection (BOD:
  • CPU Operating Voltage range of 3.0 V to 3.6 V

Package Includes:

  • 1x Fully Assembled and Tested ARM LPC2138 Quick Start Board
  • 1x LPC 2138 ARM7TDMI
  • 1x RS232 Serial Cable
  • 1x USB cable ( To Power The Board )
  • 5x Jumpers - 2mm
  • 4x Spacers
  • 8x Screws
  • 1x 2 Pin RMC Female connector with wire (2mm pitch)
  • 1x Software CDROM with
    • User Manual
    • Schematic
    • Programming Software
    • Sample Hex Code
    • Example Codes
    • Datasheet
    • Development Environment (IDE)-Evaluation Version
    • C Compiler (Evaluation Version)

Downloads:

Sort by: Recently  /  Helpful Write review

low cost,apt for a beginner

By goapakumar from N/A on June 29, 2016
Compact and Ready to use design

good quality pcb

good for academic projects

nice pcb design
Was this review helpful to you?   Yes   No

There are currently no any question about this product.

Ask a question about ARM LPC2138 Quick Start Board

Report issue about the ARM LPC2138 Quick Start Board



Ask a question about the ARM LPC2138 Quick Start Board

Report issue about the ARM LPC2138 Quick Start Board



Request price match for the ARM LPC2138 Quick Start Board

Found this item with same quality and at a lower price but prefer to buy from rhydoLABZ.com?

Please submit the url of the better price you saw. We will lauch an immediate investigation and try our best to beat the price, if it proves to be the same product. We will notify you the result by email. Thanks a lot for helping us to maintain competitive prices.

ARM LPC2138 Quick Start Board