12V Solenoid Valve - 3/4"

(0) 0 out of 5 stars Write reviewReport bug
  • Part No :
  • WID-1753
  • Availability:
  • In Stock
  • Shipping :
  • Same Day
  • Weight:
  • 0.15Kg
  • Made By:
  • Unknown
  • Quality Rank:
  • 100/100
Price:
Rs 769
(Tax Excl.)
Quantity :

Description: Have you ever wanted to control the flow of a liquid using your computer or microcontroller, but didn't know how? Well, here's how: The 12V solenoid controlled fluid valve. Simply connect a fluid source to the 3/4" threaded inlet and it will interrupt the flow until 12V is applied to the fast-on connectors on the solenoid.

Note: This is not a gravity-feed solenoid. This means that you will need enough water pressure to fully open the valve. Check the datasheet for exact details. It operates at a minimum of around 3 PSI, allowing around 3 L/min of flow. Although the datasheet shows the valve working at 220 VAC, it's actually 12 VDC.  A garden hose or other pressurized system should work just fine.

Package includes:

  • 1 x 12V Solenoid Valve - 3/4"

Documents:

Sort by: Recently  /  Helpful Write review

There are currently no any reviews about this product.

    • Q
    • How do I connect it to arduino?

      asked by Arnav Raj on June 29, 2016
    • A
    • You can connect it using a single transistor. The current draw of the solenoid will be higher than that a standard transistor can handle, so we recommend using a TIP120 Darlington Transistor.

      for more info, refer the following link

      http://www.bc-robotics.com/tutorials/controlling-a-solenoid-valve-with-arduino/

    • Q
    • How do I connect three of them to arduino?

      asked by Arnav Raj on July 03, 2016
    • A
    • We can't connect a Solenoid Valve(12V) directly to a Arduino board.Because it consumes around 300mA current.An Arduino pin can source only 5V,40mA(max).

      You can either use a transistor that has a current rating more than 300mA(eg:TIP120 NPN transistor) or you can use a ULN2003A IC.The ULN2003A is an array of seven NPN Darlington transistors capable of 500mA.

      You can also use a Motor Driver or Relay.

    • Q
    • Is it normally closed valve or normally open valve?

      asked by Arnav Rajesh on July 05, 2016
    • A
    • 12V Solenoid Valve is normally closed

Ask a question about 12V Solenoid Valve - 3/4"

Report issue about the 12V Solenoid Valve - 3/4"



Ask a question about the 12V Solenoid Valve - 3/4"

Report issue about the 12V Solenoid Valve - 3/4"



Request price match for the 12V Solenoid Valve - 3/4"

Found this item with same quality and at a lower price but prefer to buy from rhydoLABZ.com?

Please submit the url of the better price you saw. We will lauch an immediate investigation and try our best to beat the price, if it proves to be the same product. We will notify you the result by email. Thanks a lot for helping us to maintain competitive prices.

12V Solenoid Valve - 3/4"