FT232RL USB To UART Converter IC

(0) 0 out of 5 stars Write reviewReport bug
  • Part No :
  • IC-0043
  • Availability:
  • Out of Stock
  • Shipping :
  • Same Day
  • Weight:
  • 0.04Kg
  • Quality Rank:
  • 100/100
Price:
Rs 215
(Tax Excl.)
Description: The FT232RL is a USB to serial UART interface IC.Entire USB protocol handled on the chip. No USB specific firmware programming required.Possesses fully integrated 1024 bit EEPROM storing device descriptors and CBUS I/O configuration.



Features:
  • Single chip USB to asynchronous serial data transfer interface.
  • Entire USB protocol handled on the chip. No USB specific firmware programming required.
  • Fully integrated 1024 bit EEPROM storing device descriptors and CBUS I/O configuration.
  • Fully integrated USB termination resistors.
  • Fully integrated clock generation with no external crystal required plus optional clock output selection enabling a glue-less interface to external MCU or FPGA.
  • Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485, RS232 ) at TTL levels.
  • 128 byte receive buffer and 256 byte transmit buffer utilising buffer smoothing technology to allow for high data throughput.
  • FTDI‟s royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases.
  • Configurable CBUS I/O pins.
  • Transmit and receive LED drive signals.
  • UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity
  • FIFO receive and transmit buffers for high data throughput.
  • Synchronous and asynchronous bit bang interface options with RD# and WR# strobes.
  • Device supplied pre-programmed with unique USB serial number.
  • Supports bus powered, self powered and high-power bus powered USB configurations.
  • Integrated +3.3V level converter for USB I/O.
  • Integrated level converter on UART and CBUS for interfacing to between +1.8V and +5V logic.
  • True 5V/3.3V/2.8V/1.8V CMOS drive output and TTL input.
  • Configurable I/O pin output drive strength.
  • Integrated power-on-reset circuit.
  • Fully integrated AVCC supply filtering - no external filtering required.
  • UART signal inversion option.
  • +3.3V (using external oscillator) to +5.25V (internal oscillator) Single Supply Operation.
  • Low operating and USB suspend current.
  • Low USB bandwidth consumption.
  • UHCI/OHCI/EHCI host controller compatible.
  • USB 2.0 Full Speed compatible.
  • -40°C to 85°C extended operating temperature range.

Package includes:

  • 1 x FT232RL USB To UART Converter IC

Documents:

Sort by: Recently  /  Helpful Write review

There are currently no any reviews about this product.

There are currently no any question about this product.

Ask a question about FT232RL USB To UART Converter IC

Report issue about the FT232RL USB To UART Converter IC



Ask a question about the FT232RL USB To UART Converter IC

Report issue about the FT232RL USB To UART Converter IC



Request price match for the FT232RL USB To UART Converter IC

Found this item with same quality and at a lower price but prefer to buy from rhydoLABZ.com?

Please submit the url of the better price you saw. We will lauch an immediate investigation and try our best to beat the price, if it proves to be the same product. We will notify you the result by email. Thanks a lot for helping us to maintain competitive prices.

FT232RL USB To UART Converter IC