Servo Controller ( Usart & I2C) with ADC

(0) 0 out of 5 stars Write reviewReport bug
  • Part No :
  • ROB-1185
  • Availability:
  • In Stock
  • Shipping :
  • Same Day
  • Weight:
  • 0.04Kg
  • Made By:
  • rhydoLABZ
  • Quality Rank:
  • 100/100
Price:
Rs 1190
(Tax Excl.)
1190.0000 rhydoLABZ.com New In Stock
Qty Discounts Off Price
1 Rs 1190
2-4 Rs 1131
5-9 Rs 1107
10+ Rs 1071
Quantity :
Description: The "Servo Controller ( Usart & I2C)  with ADC" from Rhydolabz is a very compact solution for controlling up to eight RC servos from a PC or microcontroller. Each servo speed and range can be controlled independently. This servo controller supports I2C (TWI) and USART communications. The user could control the servomotors by sending the desired command  from a USART or I2C (TWI) supporting device. Servo Controller supports two communication protocols  Mini SSCII and RHYDO-SSC protocol. The built in 2 ADC Port can be used for measuring any analog voltage ( ie. 2 Sensor values) and the other ADC channel is permanently connected to measure Servo Voltage. With appropriate command from host controller the module will do ADC conversion for the selected channel and send out the result via I2C / USART. This feature is extremely useful for microcontroller without Onchip ADC ( like AT89S52), and to detect the battery low condition . Up to 128 Servos can be controlled by connecting 16 Module  in Parallel.

Features:
  • Compact High Quality Two layer PTH PCB
  • Professional EMI/RFI Complaint PCB Layout Design for Noise Reduction
  • Support Mini SSII and RHYDO-SSC Protocol
  • I2C and USART interface with host Controller
  • 3 Channel ADC measurement using command
  • Servo volage measurement using command
  • Onboard EEPROM to save Configuration Parameters
  • Onboard RS232 to TTL conversion for PC based controlling
  • On Board Status LED Indicator
  • On Board TTL / RS232 / SPI connector
  • Can set Neutral Point for each servo
  • On Board EEPROM
  • Mini SSII Mode in default and ready to use .
Specifications:
  • Number of servo ports: 8 Nos
  • Pulse Width Range: 0.25 to 2.75ms
  • Resolution: (~0.05 degree)
  • Supply voltage: 5 -16V
  • I/O Voltage: 0-5 V
  • Current consumption: 5 mA (average)
  • Protocol supported: Mini SSII and RHYDO-SSC
  • Interface Supported: I2C , USART(TTL), RS232

 

Sort by: Recently  /  Helpful Write review

There are currently no any reviews about this product.

There are currently no any question about this product.

Ask a question about Servo Controller ( Usart & I2C) with ADC

Report issue about the Servo Controller ( Usart & I2C) with ADC



Ask a question about the Servo Controller ( Usart & I2C) with ADC

Report issue about the Servo Controller ( Usart & I2C) with ADC



Request price match for the Servo Controller ( Usart & I2C) with ADC

Found this item with same quality and at a lower price but prefer to buy from rhydoLABZ.com?

Please submit the url of the better price you saw. We will lauch an immediate investigation and try our best to beat the price, if it proves to be the same product. We will notify you the result by email. Thanks a lot for helping us to maintain competitive prices.

Servo Controller ( Usart & I2C) with ADC