Description: This is the CP21202 Breakout Board. This is a great little tool for embedded systems that require a serial connection to a computer. The board can simply attach to a USB bus via a mini USB connector and will appear as a standard COM port.Features:
Thes CP2102 doesn’t require any external oscillator, it has an on-board voltage regulator, and it even uses a reprogrammable internal EEPROM for the device description. The full hardware UART has flow control for baud rates from 300bps to 921600bps. This breakout also allows you to connect the TX/RX pins of your favorite microcontroller or serial application to the RX/TX pins of the breakout, creating a simple serial cable replacement.
Note: Unit comes with interfacing voltage
selection jumper set to 5v (default), for connecting to boards with 3V3
voltage reference, user has to change this jumper to 3v3 or drop a
comment while placing the order so that necessary changes could be made
- Implements full v2.0 USB protocol
- Jumpers to select 3V3 or 5V power output
- Needs no external crystal
- Internal EEPROM for device ID and Product Description strings
Documents & Downloads:
- 1 x USB to Serial Converter
- 1 x 4 pin RMC Connector with Cable
There are currently no any question about this product.