USB to Serial Converter (5V/3V3)

(0) 0 out of 5 stars Write reviewReport bug
  • Part No :
  • INT-2017
  • Availability:
  • In Stock
  • Shipping :
  • Same Day
  • Weight:
  • 0.05Kg
  • Made By:
  • rhydoLABZ
  • Mfr.Part.No:
  • INT-2017
  • Quality Rank:
  • 100/100
Price:
Rs 661
(Tax Excl.)
Quantity :

Description: This is newest revision of rhydoLABZ make USB to Serial Converter (FT232RL Breakout) board. It is a compact and ready to use board which performs USB to Serial TTL (5V and 3V3) and vice versa conversion. The board holds an FT232RL USB UART IC for  conversion. This module process an easiest interfacing of USB with microcontroller application boards. The unit is powered through USB and does not require external Power.The module Can be used for interfacing 5V and 3V3 application (ARM ect.) board to PC USB port. The Selected interfacing voltage is also available at RMC connector for powering ( <50ma only) interfacing sensors ect.All FT232RL Pins are available at bergstrip pin out for advanced users.

Features 

  •  USB 2.0 Full Speed compatible.
  • Compact High Quality Two layer PTH PCB 
  • Professional EMI/RFI Complaint PCB Layout Design for Noise Reduction
  • On Board FT232R USB UART IC
  • Jumper selection for Interfacing Voltage Selection ( 3V3/5V)
  • Powered via USB
  • On Board Power LED Indicator
  • Supports data transfer from 300 Baud to 1 Mega Baud 
  • Single chip USB to asynchronous serial data transfer interface.
  • Entire USB protocol handled on the chip. No USB specific firmware programming required.
  • Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485, RS232 ) at TTL levels.
  • 128 byte receive buffer and 256 byte transmit buffer utilising buffer smoothing technology to allow for high data throughput.
  • FTDI’s royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases.
  • Unique USB FTDIChip-ID™ feature.
  • Configurable CBUS I/O pins.
  • LEDs for Transmit and receive signals.
  • UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity
  • Synchronous and asynchronous bit bang interface options with RD# and WR# strobes.
  • Device supplied pre-programmed with unique USB serial number
  • Integrated level converter on UART and CBUS for interfacing to between +1.8V and +5V logic.
  • Configurable I/O pin output drive strength
  • UART signal inversion option.
  • Low operating and USB suspend current.
  • Low USB bandwidth consumption.
  • UHCI/OHCI/EHCI host controller compatible.
  • All I/O pin available at bergstrip
  • Internal EEPROM for device ID and Product Description strings
  • Royalty-Free Driver support for Windows, Linux, and Mac OSX

Package includes:

  • 1 x USB to Serial Converter (5V/3V3)
  • 1 x 4 pin RMC Connector with Cable

Downloads & Downloads:

Sort by: Recently  /  Helpful Write review

There are currently no any reviews about this product.

There are currently no any question about this product.

Ask a question about USB to Serial Converter (5V/3V3)

Report issue about the USB to Serial Converter (5V/3V3)



Ask a question about the USB to Serial Converter (5V/3V3)

Report issue about the USB to Serial Converter (5V/3V3)



Request price match for the USB to Serial Converter (5V/3V3)

Found this item with same quality and at a lower price but prefer to buy from rhydoLABZ.com?

Please submit the url of the better price you saw. We will lauch an immediate investigation and try our best to beat the price, if it proves to be the same product. We will notify you the result by email. Thanks a lot for helping us to maintain competitive prices.

USB to Serial Converter (5V/3V3)