ARM LPC2138 Development Board

Price : USD 86.17 (Tax excl.)
Part No: Dev-1125
Availability: In Stock, Ships same day
Weight: 0.75Kg
Made by: RHYDO

Quantity Discount Price
1USD 86.17
2-4USD 81.87
5-9USD 80.13
10+USD 77.55
Qty:


Description: The eCee LPC2138 Development Board can be used to evaluate and demonstrate the capabilities of NXP LPC2138 microcontrollers. The board is designed for general purpose applications and includes a variety of hardware to exercise microcontroller peripherals. Ideally suitable for training and development purposes.

eCee LPC2138 Features
• Includes Base Board + Header Board
• Compact and Ready to use design
• Professional EMI/RFI Complaint PCB Layout Design for Noise Reduction
• High Quality Two layer PTH PCB

Base Board Features
• Supports LPC2129/32/48  Header Boards
• Includes LPC2138 Header Board
• No separate programmer required (On-Chip Boot loader)
• No Separate power adapter required (USB power source)
• Two RS-232 Interfaces (For direct connection to PC’s Serial port)
• On Board Two Line LCD Display (2x16) (with jumper select option)
• On Board 8 LED Interface to test Port pin (with jumper select option)
• On Board Pot interface to ADC
• On Board Temperature Sensor Interface
• On Board Buzzer Interface
• On Board 4x4 (16 Keys) Matrix Keyboard
• On Board I2C EEPROM
• On Board External Interrupt Button
• On Board Connector for PWM Output
• PWM controlled LCD backlight        
• On Board Connector for AnalogOutput
• On Board Speaker Output
• LF Amplifier LM 386 
• Adaptor (any standard 9-12V power supply) option
• On Board Power LED Indicator
• On Board Reset button
• All Port Pins available at Berge Strip
• On Board JTAG Connector for Debugging/Programming
• Power Supply Reverse Polarity Protection
• Three On Board DB9 Connectors (Two for UART and One for CAN)
• On Board USB Connector
• On Board 1 Amp Voltage Regulator
• On Board Connector for regulated 3V3 output
• On Board Connector for regulated 5V output
• Controller Area Network (CAN) transceiver (optional)
• Can be used as main board for developing applications

Header Board Features
• Easy to use DIP Package
• Includes NXP LPC 2138 Microcontroller
• On Board Power LED Indicator
• On Board JTAG Jumper
• On Board 10 MHz Crystal Oscillator
• On Board 32.768 KHz Crystal for RTC
• On Board 3.3V Regulator
• On Board Power Supply de-Coupling Capacitors
• All Port Pins available at Berge Strip
• Header Module can be removed for developing your circuit

LPC 2138  Chip Specification
•NXP LPC 2138 with 10 MHz Crystal Oscillator (With Boot loader Software)
•High Performance 32-bit ARM7TDMI-S™ CPU
•512 KB Programmable Flash Memory provides minimum of 10,000 erase/write cycles and  10 years of data-retention.
•32 KB Data Memory (SRAM)
•In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software.
•Single Flash sector or full chip erase in 400 ms and 256 bytes programming in 1 ms.
•EmbeddedICE  and Embedded Trace interfaces offer real-time debugging with the  on-chip RealMonitor™ software and high   speed tracing of instruction execution.
•Two 8-channel 10-bit A/D with conversion times as low as 2.44 us per channel.
•Single 10-bit D/A converter provide variable analog output.
•Two 32-bit Timers/External event counters.
•Four Capture and four Compare channels.
•PWM unit with six output pins.
•Low power Real-time clock with independent power and dedicated 32 kHz clock input.
•Multiple serial interfaces including two UARTs, two Fast I2C (400 kbit/s), SPI™ and SSP
        with buffering and variable data length capabilities.
•Vectored interrupt controller with configurable priorities and vector addresses.
•Up to 47 of 5 V tolerant general purpose I/O pins.
•Up to nine edge or level sensitive external interrupt pins.
•60 MHz maximum CPU clock available from programmable on-chip Phase-Locked Loop (PLL) with settling time of 100us.
•On-chip integrated oscillator operates with external crystal in range of 1 MHz to 30 MHz
       or with external oscillator from 1 MHz to 50 MHz.
•Power saving modes include Idle and Power-down.
•Individual enable/disable of peripheral functions.
•Processor wake-up from Power-down mode via external interrupt or Real-time Clock.
•Single power supply chip with Power-On Reset (POR) and Brown-Out Detection (BOD:
•CPU Operating Voltage range of 3.0 V to 3.6 V

eCee LPC2138 Package Includes
•Fully Assembled and Tested eCee LPC2138 Development board
•Software CDROM with
       Schematic
       Programming Software
       Sample Hex Code
       Example Codes

Documents:
       Quick Start Manual


Comments


Your IP Address is: 204.236.255.69
Copyright © 2014 rhydoLABZ INDIA. Powered by rhydoLABZ
RHYDO