ARM LPC2129 CAN Development Board

Price : USD 86.17 (Tax excl.)
Part No: DEV-1124
Availability: In Stock, Ships same day
Weight: 0.75Kg
Made by: RHYDO

Quantity Discount Price
1USD 86.17
2-4USD 81.87
5-9USD 80.13
10+USD 77.55
Qty:


Description:   The eCee LPC2129 Development Board can be used to evaluate and demonstrate the capabilities of NXP LPC2129 microcontrollers. The board is designed for general purpose applications and includes a variety of hardware to exercise microcontroller peripherals. Ideally suitable for training and development purposes.

eCee LPC2129 Development Board Features
• Includes Base board + Header Board
• Compact and Ready to use design
• Professional EMI/RFI Complaint PCB Layout Design for Noise Reduction
• High Quality Two layer PTH PCB

Base Board Features
• Supports LPC2132/38/48  Header Boards
• Includes LPC2129 Header Board with in-built CAN Module
• No separate programmer required (On-Chip Boot loader)
• No Separate power adapter required (USB power source)
• Two RS-232 Interfaces (For direct connection to PC’s Serial port)
• On Board Two Line LCD Display (2x16) (with jumper select option)
• On Board 8 LED Interface to test Port pin (with jumper select option)
• On Board Pot interface to ADC
• On Board Temperature Sensor Interface
• On Board Buzzer Interface
• On Board 4x4 (16 Keys) Matrix Keyboard
• On Board I2C EEPROM
• On Board External Interrupt Button
• On Board Connector for PWM Output
• PWM controlled LCD backlight        
• On Board Connector for AnalogOutput
• On Board Speaker Output
• LF Amplifier LM 386 
• Adaptor (any standard 9-12V power supply) option
• On Board Power LED Indicator
• On Board Reset button
• All Port Pins available at Berge Strip
• On Board JTAG Connector for Debugging/Programming
• Power Supply Reverse Polarity Protection
• Three On Board DB9 Connectors (Two for UART and One for CAN)
• On Board USB Connector
• On Board 1 Amp Voltage Regulator
• On Board Connector for regulated 3V3 output
• On Board Connector for regulated 5V output
• Controller Area Network (CAN) transceiver 
• Can be used as main board for developing applications

Header Board Features
• Easy to use DIP Package
• Includes NXP LPC 2129 Microcontroller with in-built CAN Module
• On Board Power LED Indicator
• On Board JTAG Jumper
• On Board 10 MHz Crystal Oscillator
• On Board 32.768 KHz Crystal for RTC
• On Board 3.3V Regulator
• On Board 1.8V Regulator
• On Board Power Supply de-Coupling Capacitors
• All Port Pins available at Berge Strip
• Header Module can be removed for developing your circuit

LPC 2129 Chip Specification
•NXP LPC 2129 with 10 MHz Crystal Oscillator (With Boot loader Software)
•High Performance 32-bit ARM7TDMI-S™ CPU
•256 KB Programmable Flash Memory provides a minimum of 100,000 erase/write cycles and 20 years of data retention.
•16 KB Data Memory (SRAM)
•In-System/In-Application Programming (ISP/IAP) via on-chip boot-loader software.
•Flash programming takes 1 ms per 512 byte line. Single sector or full chip erase takes 400ms.
•EmbeddedICE-RT interface enables breakpoints and watch points.
•Two interconnected CAN interfaces with advanced acceptance  filters
•Four channel 10-bit A/D converter with conversion time as low as 2.44 us.
•Multiple serial interfaces including two UARTs , Fast I2C (400 kbits/s) and two SPIs
•60MHz maximum CPU clock available from programmable on-chip Phase-Locked Loop
•Vectored Interrupt Controller with configurable priorities
•Two 32-bit Timers.
•Four Capture and four Compare channels.
•PWM unit with six output pins.
•Real-time clock.
•Watch Dog Timer
•Up to forty-six 5V tolerant general purpose I/O pins.
•Up to nine edge or level sensitive external interrupt pins.
•On-chip crystal oscillator with an operating range of 1MHz to 30MHz.
•Two low power modes -  Idle and Power-down.
•Processor wake-up from Power-down mode via external interrupt.
•Individual enable/disable of peripheral functions for power optimization.
•CPU operating voltage range of 1.65V to 1.95V and I/O power supply range of 3.0V to 3.6V

eCee LPC2129 Package Includes
•Fully Assembled and Tested eCee LPC2129 Development board
•Software CDROM with
     Schematic
     Programming Software
     Sample Hex Code
     Example Codes

Downloads:
   
Quick Start Manual


Comments

by Ramakrishnan C on 03/16/2011
This is having all features about hardware,that too include header board

Rating: 5 of 5 Stars [5 of 5 Stars]


 


Your IP Address is: 50.16.24.56
Copyright © 2014 rhydoLABZ INDIA. Powered by rhydoLABZ
RHYDO