| Product Image |
Qty.- |
Item Name |
Your Price |
 |
 |
This current sensor is a carrier board or breakout board made by Pololu for Allegro’s ACS714LLCTR-30A-T Hall effect-based linear current sensor; we... |
Rs. 650/-
... more info

|
 |
 |
This current sensor is a carrier board or breakout board made by Pololu for Allegro’s ACS714LLCTR-05B-T Hall effect-based linear current sensor; we... |
Rs. 590/-

|
 |
 |
This breakout board is designed to work with any of the MQ-series gas sensors, simplifying the interface from 6 to 3 pins—ground, +5V VCC, and an... |
Rs. 90/-
... more info

|
 |
 |
This small digital distance sensor from POLOLU, detects objects between 2 and 10 cm (0.8" and 4") away. With its quick response time, small... |
Rs. 390/-
... more info

|
 |
 |
Rhydolabz's "ECHO" Ultrasonic Distance Sensor with ASCII serial O/P is an amazing product that provides very short to long-range detection... |
Rs. 1,650/- Rs. 1,290/- Save: 22% off

|
 |
 |
The "ECHO" ,Ultrasonic Distance Sensor from Rhydolabz is an amazing product that provides very short (2CM) to long-range (4M) detection and... |
Rs. 1,600/- Rs. 1,290/- Save: 19% off

|
 |
 |
This is a MMA7260Q 3 Axis Low-g Micromachined Accelerometer module with sensitivity selection using MMA7260Q accelerometer Sensor From Freescale.... |
Rs. 1,600/- Rs. 1,190/- Save: 26% off

|
 |
 |
This LISY300AL Single Axis Gyro is essentially a carrier board or breakout board for the ST LISY300AL MEMS (micro-electro-mechanical systems)... |
Rs. 2,300/-

|
 |
 |
This LPG Gas Sensor (MQ6), ideal sensor for use to detect the presence of a dangerous LPG leak in your Home, car or in a service station, storage... |
Rs. 350/-

|
 |
 |
This Ultrasonic Transuducer is a Compact Ultrasonic Sensor & Transmitter suitable for distance meassurement, with high-performance... |
Rs. 350/-

|
 |
 |
3-Axis Accelerometer Sensor ( I2C) is based on MMA7660FC is a ±1.5 g 3-Axis Accelerometer with Digital Output (I2C).This module is suitable for... |
Rs. 950/-

|
 |
 |
Digital Compass Module- HMC6352 is a very simple breakout board for the popular HMC6352 from Honeywell . If you need simple, clean, degree... |
Rs. 3,800/- Rs. 2,950/- Save: 22% off

|
 |
 |
This semiconductor gas sensor detects the presence of combustible gas and smoke at concentrations from 300 to 10,000 ppm. The sensor’s simple analog... |
Rs. 450/-

|
 |
 |
Excellent performance infrared sensor for use in alarm burglar systems, visitor presence monitoring, light switches and robots. These compact, easy... |
Rs. 150/-

|
 |
 |
MQ-7 is a Carbon Monoxide (CO) sensor, suitable for sensing Carbon Monoxide concentrations(PPM) in the air. The MQ-7 sensor can meassure CO... |
Rs. 450/-

|
 |
 |
This is a pyrolectric sensor (PIR) module which developed for human body detection. A PIR detector combined with a fresnel lens are mounted on a... |
Rs. 425/-

|
 |
 |
This alcohol sensor is suitable for detecting alcohol concentration on your breath, just like your common breathalyzer. It has a high sensitivity and... |
Rs. 450/-

|
 |
 |
This is a simple-to-use compressed natural gas (CNG) sensor, suitable for sensing natural gas (composed of mostly Methane [CH4]) concentrations in... |
Rs. 450/-

|
 |
 |
A3290 is chopper stabilized HALL effect Latches for ultra sensitive and stable operation from ALLEGRO Micro systems. .These devices are designed for... |
Rs. 78/-

|
 |
 |
MH183KUA is a unipolar Hall effect sensor IC. It incorporates advanced chopper stabilization technology to provide accurate and stable magnetic... |
Rs. 78/-

|
 |
 |
Description: The TCM8240MD is a high quality, very small 1.3 mega-pixel color camera from Toshiba with the standard data+I2C interface. The nice... |
Rs. 890/-

|
 |
 |
Description: This is a breakout board for the ST's dual-axis LPR530AL gyro. The LPR530AL measures angular velocity along the pitch and roll axes... |
Rs. 1,990/-

|
 |
 |
The LM35 series are precision integrated-circuit temperature sensors, whose output voltage is linearly proportional to the Celsius (Centigrade)... |
Rs. 55/-

|
 |
 |
Description: This is the breakout board for the IDG500, which includes an on-board 2.8V regulator and all pins broken out to 0.1" pin holes. The... |
Rs. 2,499/-

|
 |
 |
The TSOP1738 series are miniaturized receivers for infrared remote control systems. PIN diode and preamplifier are assembled on lead frame, the epoxy... |
Rs. 52/-

|
 |
 |
Description: This is a breakout board for the ST's dual-axis LPY5150AL gyro. The LPY5150AL measures angular velocity along the pitch and yaw axes... |
Rs. 1,990/-

|
 |
 |
Description: The MPL115A1 is a digital barometric pressure sensor that uses MEMs technology to give accurate pressure measurements between 50kPa and... |
Rs. 780/-

|
 |
 |
This K-type thermocouple probe provides accurate temperature monitoring in range of -200 to 1370°C (-328 to 2498°F). The probe is 150 mm(6"... |
Rs. 700/-

|
 |
 |
Description: This Inertia Measurement Unit Combo Board incorporates the IDG500 dual-axis gyroscope and Analog Devices triple axis ADXL335... |
Rs. 4,700/-
... more info

|
 |
 |
The DS18S20 digital thermometer provides 9-bit Celsius temperature measurements and has an alarm function with nonvolatile user-programmable upper... |
Rs. 195/-
... more info

|
 |
 |
This is a breakout board for the fully integrated Hall Effect based linear ACS712 current sensor. The sensor gives precise current measurement... |
Rs. 590/-
... more info

|
 |
 |
The LPG Gas Sensor Module is designed to enable LPG detection interface to Microcontroller without ADC Channels. It allows to determine when a... |
Rs. 650/-

|
 |
 |
Description: This is an evaluation board for the MLX90614 IR Thermometer. The sensor is connected to an ATmega328 running at 3.3V with a STK500... |
Rs. 3,390/-

|
 |
 |
Pair of Infrared LED and Photo diode tuned to same IR wavelength . You can use this sensors for your Roboics , Pulse Oximeter and other... |
Rs. 35/-

|
 |
 |
|
Rs. 8/-

|
 |
 |
We can't tell what metallic salmon looks like, but this very small sensor Avago ADJD-S371-Q999 can! This is a 4 channel digital sensor with a mere... |
Rs. 650/-

|
 |
 |
This is a force sensitive resistor with a square, 1.75x1.5", sensing area. This FSR will vary its resistance depending on how much pressure is... |
Rs. 590/-

|
 |
 |
This is a force sensitive resistor with a round, 0.5" diameter, sensing area. This FSR will vary its resistance depending on how much pressure... |
Rs. 475/-

|
 |
 |
Infrared proximity sensor made by Sharp. Part # GP2Y0A02YK0F has an analog output that varies from 2.8V at 15cm to 0.4V at 150cm with a supply... |
Rs. 880/-

|
 |
 |
This basic piezo sensor is often used for flex, touch, vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when... |
Rs. 225/-

|