Systems has designed and developed three plastic bezels to facilitate
mounting and settling of units when using 4D Systems intelligent display
modules. This is a 7.0" bezel for the uLCD-70DT Intelligent Display.
bezels provide not only a sleek cover to 4D Systems display modules but
also an easy method to panel mount the display module into a secure
enclosure. Spring clips attach to the bezel in four locations to tightly
hold onto enclosure or wall panel. This offers a range of panel
thickness from 1mm to 2.5mm without the need to add washers.
NOTE: This bezel is designed for indoor use only. It is not weather-sealed,
nor does it bear any Ingress Protection (IP) rating. Use indoor with
care--preferably in a clean environment as the bezel offers little
protection to the circuitry against moisture or particles.
bezels available in 3.2", 4.3" and 7.0" display sizes, suitable for the
uLCD-32PTU and 4DPi-32 (3.2" Bezel), the uLCD-43PT, uLCD-43DT,
4DLCD-FT843, Armadillo-43T (4.3" Bezel), and the uLCD-70DT (7.0" Bezel)
- Provide a simple method to panel mount the display modules, and provide a finished look to the surround of the display
- Simple cut-out required, no mounting holes required to be drilled in the panel for screws
- Brass mounting inserts in the rear of the bezel to secure and durable fastening
- Spring Clips for attaching the bezel to the panel (Qty depends on size)
- M2 mounting screws and washers included
NOTE: CAD Models of the 4D BEZELS are designed for easy design into enclosures
using a suitable CAD Application. These are not designed to be 3D
Printed as there is metal hardware required for mounting.
- 1x 7" Bezel (White Colour)
- 4x Spring Clips
- 8x Mounting Screws
- 8x Mounting Washers