NXP LPC1114 Starter Kit + Debugger

Description
Reviews

Description: The LPC1114 Starter Kit (P11L) produced by Embest is a brand new and low cost full-featured evaluation kit based on the NXP LPC1100 Cortex-M0 Series processor. The target board works at up to 50MHz, supports the RS485 Mode and integrates power management Unit (PMU). In addition, the board features a wide range of peripherals, including UART interface, eight channels 10bit ADC, two 16bit timers, two 32bit timers, SSP, I2C.

The kit also integrates a smart and easy-to-use Colink2 JTAG Debugger. It is a good platform for application development and the first choice for learners.

Integrates one LPC1114 Target Board and one smart JTAG Debugger
Brand new, complete functions but very low cost
Features NXP LPC1114FBD48 processor, based on 32bit ARM Cortex-M0, 50MHz

The LPC1114 Starter Kit integrates the NXP LPC1114FBD48 processor which is used high-performance ARM Cortex-M0 32bit RISC kernel, works at up to 50MHz and belongs to the LPC1100 Series Microcontrollers. The LPC1100 Series works in the temperature range from minus 65 Celsius degrees to 150 Celsius degrees, and its power voltage is from 2.0V to 3.6V. The various power saving modes highlight its low power consumption feature.

The comprehensive peripherals of the LPC1114 processor make it suitable for a variety of applications like

Motor driver and application control
PC peripherals
Alarm system

Features:

Kit Features:

LPC1114 32bit RISC processor, based on ARM Cortex-M0, 50MHz
Eight LEDS
One Power Indicator
One BOOT Key-press
One RESET Key-press
48pins IO extension One UART, supporting RS-485/EIA-485
SSP Interface
I2C Interface
Eight Channels 10bits ADC Module
One 10pins SWD Debugging Interface
One temperature sensor

USB JTAG Debugger Features

Only support LPC1100 Series currently(Can support other Cortex-M0/M3 MCU later)
Support SW/JTAG debug and Download
Download speed up to 110Kb/s
flexible debugging socket, support 20/10/8 pins connector
Support Keil MDK and CooCox full series software

Note: For debugging use SW debug, the LPC1114 need to run at 50MHz frequency.

Package Includes:

1x LPC1114LK Development Board
1x UART DB9 to DIP cable
1x MINI USB Cable
1x Serial Port Cable
1x CD-ROM with Examples

There are plenty of documentations and materials in the CD-ROM of this NXP LPC1114 Starter Kitt, such as users manual, datasheets, software, example programs, and so on.

Documents:

Tags: NXP , LPC1114 , Starter Kit , Cortex-M0 , RS485 , UART , ADC , timers , SSP , I2C

We also recommend

ARM7 Stick - LPC2129 - rhydoLABZ

-25 %

Description: The Stick Series quick start boards from rhydoLABZ are primarily intended to be used as a development system for 64-pin ARM Controll..

Rs 2,999.00 Rs 3,999.00

ARM7 Stick - LPC2138 - rhydoLABZ

Description: The Stick Series quick start boards from rhydoLABZ are primarily intended to be used as a development system for 64-pin ARM Controll..

Rs 2,999.00

ARM7 Stick - LPC2148 - rhydoLABZ

Description: The Stick Series quick start boards from rhydoLABZ are primarily intended to be used as a development system for 64-pin ARM Controll..

Rs 2,999.00

AT89S52 Quickstart Board V2 - rhydoLABZ

AT89S52/AT89C51 Quick Start board is user friendly, multipurpose programmable board, for the beginner as well as a higher end user. This is a Low Cost..

Rs 725.00

ATMEGA2560 Breakout Board - rhydoLABZ

-15 %

The ATMEGA2560 Breakout board is a development board that has lower component count and smaller board size. It is an Arduino Mega 2560 compatible boar..

Rs 1,699.00 Rs 1,999.00

From the same brand

ATMEL SAM9G45 ARM9 Board with 4.3inch Touch LCD

-35 %

Description: The ATMEL SAM9G45 Board (A9G4) produced by Embest is a full-featured evaluation board based on the ATMEL's new processor C AT91SAM9G45 wh..

Rs 18,943.00 Rs 29,144.00

STM32F103ZE ARM-CM3 Board

-50 %

The STM32F103ZE (SZE1) is an ARM evaluation board produced by Embest, integrate the STMicroelectronic ARM Cortex-M3 core-based processor STM32F103ZE, ..

Rs 5,519.00 Rs 11,039.00

ATMEL ATSAM3U ARM-CM3 Board

-40 %

The ATSAM3U ARM-CM3 Board (AT3U) is an ARM embedded evaluation board produced by Embest, integrate the ATMEL Cortex-M3 core-based processor ATSAM3U4E,..

Rs 7,285.00 Rs 12,143.00