ARM LPC2148 USB Development Board

(1) 5 out of 5 stars Write reviewReport bug
  • Part No :
  • DEV-1835
  • Availability:
  • In Stock
  • Shipping :
  • Same Day
  • Weight:
  • 1Kg
  • Made By:
  • rhydoLABZ
  • Mfr.Part.No:
  • DEV-1835
  • Quality Rank:
  • 100/100
Rs 4608
(Tax Excl.)
Qty Discounts Off Price
1 Rs 4608
2-4 Rs 4378
5-9 Rs 4285
10+ Rs 4147
Quantity :
Description: The eCee LPC2148 Development Board can be used to evaluate and demonstrate the capabilities of NXP LPC2148 microcontrollers. The board is designed for general purpose applications and includes a variety of hardware to exercise microcontroller peripherals. Ideally suitable for training and development purposes.

eCee LPC2148 Features

  • Includes Base Board + Header Board
  • Compact and Ready to use design
  • Professional EMI/RFI Complaint PCB Layout Design for Noise Reduction
  • High Quality Two layer PTH PCB

Base Board Features

  • Supports LPC2129/32/38  Header Boards
  • Includes LPC2148 Header Board with built-in USB Module
  • No separate programmer required (On-Chip Boot loader)
  • No Separate power adapter required (USB power source)
  • Two RS-232 Interfaces (For direct connection to PC’s Serial port)
  • On Board Two Line LCD Display (2x16) (with jumper select option)
  • On Board 8 LED Interface to test Port pin (with jumper select option)
  • On Board Pot interface to ADC  
  • On Board Buzzer Interface
  • On Board 4x4 (16 Keys) Matrix Keyboard
  • On Board I2C EEPROM
  • On Board External Interrupt Button
  • On Board Connector for PWM Output
  • PWM controlled LCD backlight        
  • On Board Connector for Analog Output
  • On Board Speaker Output
  • LF Amplifier LM 386 
  • Adaptor (any standard 9-12V power supply) option
  • On Board Power LED Indicator
  • On Board Reset button
  • All Port Pins available at Berg Strip
  • On Board JTAG Connector for Debugging/Programming
  • Power Supply Reverse Polarity Protection
  • Three On Board DB9 Connectors (Two for UART and One for CAN)
  • On Board USB Connector
  • On Board 1 Amp Voltage Regulator
  • On Board Connector for regulated 3V3 output
  • On Board Connector for regulated 5V output
  • Controller Area Network (CAN) transceiver (optional)
  • Can be used as main board for developing applications

Header Board Features

  • Easy to use DIP Package
  • Includes NXP LPC 2148 Microcontroller with built-in USB Module
  • On Board Power LED Indicator
  • On Board JTAG Jumper
  • On Board 12 MHz Crystal Oscillator
  • On Board 32.768 KHz Crystal for RTC
  • On Board 3.3V Regulator
  • On Board Power Supply de-coupling Capacitors
  • All Port Pins available at Berg Strip
  • Header Module can be removed for developing your circuit

LPC 2148 Specification

  • NXP LPC 2148 with 12 MHz Crystal Oscillator (With Boot loader Software)
  • High Performance 32-bit ARM7TDMI-S™ CPU
  • 512 KB Programmable Flash Memory provides minimum of 10,000 erase/write cycles and 10 years of data-retention.
  • 32 KB + 8 KB Data Memory  (SRAM)
  • Provides 8KB of on-chip RAM accessible to USB by DMA
  • USB 2.0 Full-speed compliant device controller with 2 KB of endpoint RAM.
  • In-System Programming/In-Application Programming (ISP/IAP) via on-chip boot loader software.
  • Single Flash sector or full chip erase in 400 ms and programming of 256 bytes in 1 ms.
  • Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on-chip RealMonitor software and high-speed tracing of instruction execution.
  • Two 10-bit ADCs provide a total of 14 analog inputs, with conversion times as low as 2.44 us per channel.
  • Single 10-bit DAC provides variable analog output.
  • Two 32-bit Timers/External event counters.
  • Four Capture and four Compare channels.
  • PWM unit with six output pins.
  • Low power Real-time clock with independent power and dedicated 32 kHz clock input.
  • Multiple serial interfaces including two UARTs, two Fast I2C (400 kbit/s), SPI™ and SSP  with buffering and variable data length capabilities.
  • Vectored interrupt controller with configurable priorities and vector addresses.
  • Up to 45 of 5 V tolerant general purpose I/O pins.
  • Up to nine edge or level sensitive external interrupt pins.
  • 60 MHz maximum CPU clock available from programmable on-chip Phase-Locked Loop (PLL) with settling time of 100us.
  • On-chip integrated oscillator operates with external crystal in range of 1 MHz to 25 MHz
  • Power saving modes include Idle and Power-down.
  • Individual enable/disable of peripheral functions.
  • Processor wake-up from Power-down mode via external interrupt.
  • Single power supply chip with Power-On Reset (POR) and Brown-Out Detection (BOD)
  • CPU Operating Voltage range of 3.0 V to 3.6 V

eCee LPC2148 Package Includes


Sort by: Recently  /  Helpful Write review

Really great product

By Naveen from Thrissur, India on April 27, 2016
Apt for beginners and pros alike
Was this review helpful to you?   Yes   No

There are currently no any question about this product.

Ask a question about ARM LPC2148 USB Development Board

Report issue about the ARM LPC2148 USB Development Board

Ask a question about the ARM LPC2148 USB Development Board

Report issue about the ARM LPC2148 USB Development Board

Request price match for the ARM LPC2148 USB Development Board

Found this item with same quality and at a lower price but prefer to buy from

Please submit the url of the better price you saw. We will lauch an immediate investigation and try our best to beat the price, if it proves to be the same product. We will notify you the result by email. Thanks a lot for helping us to maintain competitive prices.

ARM LPC2148 USB Development Board