The SparkFun Lumenati 8-pack is a coin-sized board equipped with seven APA102C LEDs surrounding the outer edge of the board, with one in the center.The 8-pack board can be daisy-chained with other Lumenati boards. The APA102C LEDs on each board with numbers indicating their position in the sequence to write code more easily.
The APA102C addressable LEDs operate on +5V power input, as well as 0–5V logic levels for clock and data, and employ a 2-wire communication protocol consisting of a clock line and a data line. While this requires one more wire than standard WS2812B LEDs, the advantage is that the communication with the LEDs becomes somewhat timing-independent, allowing to run these directly off of a Raspberry Pi or other single-board computer that doesn’t normally allow for a long, precisely timed data stream without the use of additional hardware.
Note: This product only includes one board, not eight. The term “8-pack” refers to there being eight APA102C LEDs equipped to the Lumenati.
Features of SparkFun Lumenati 8-pack
- Coin-sized board with four APA102C LEDs
- LEDs employ a 2-wire communication protocol
- Operating voltage +5V
- Operating temperature : -40 °C to +70 °C
- 1 x SparkFun Lumenati 4-pack
- 28.3mm x 28.3mm x 3.2mm (1.11" x 1.11" x 0.12")
There are currently no any reviews about this product.
There are currently no any question about this product.