User Interface Shield

(2) 4.5 out of 5 stars Write reviewReport bug
  • Part No :
  • INT-2574
  • Availability:
  • In Stock
  • Shipping :
  • Same Day
  • Weight:
  • 0.06Kg
  • Made By:
  • rhydoLABZ
  • Mfr.Part.No:
  • INT-2574
  • Quality Rank:
  • 100/100
Price:
Rs 299
(Tax Excl.)
Quantity :
rhydoLABZ UI Shield provides an easy way of interfacing display modules with your Arduino boards. It supports monochrome OLED (0.96" and 1.3") display module as well as standard Character LCDs, along with 5 keypad pins and few other added features. The 4 directional buttons plus select button allows basic control input. This feature packed shield makes an ideal platform to build a stand-alone project with its own user interface.
 
The communication interface between the OLED display and the controller is via hardware SPI pins of the Arduino. Both the DC and CS signals of the display module are jumpered on the shield PCB for easy hardware configuration. Reset pin (RES) of the OLED module comes in connection with D10 of the Arduino. DC signal determines whether the transferred data is written to display data RAM or command register. You could use the SPI library provided under the resources tab below to display alphabets, numbers, symbols, images and anything once you know to handle the pixels.
 
Alphanumeric LCDs do require quite a few digital pins,  to control and communicate with the LCD. That has its cost when it comes to a classic Arduino, here we have the solution! Our shield uses 4bit mode of interfacing, added advantage, works perfectly in 4-bit mode with the “LiquidCrystal” library found in the Arduino IDE, using this library will allow you to control the LCD with only 6 digital I/O lines. Apart from the display interfacing, it has input switches, on board buzzer and LEDs. Shield uses the digital pins D8 to D13 for LCD interfacing, D3 toD7 for keypad buttons and D2 for buzzer. Analog pins A2, A3 and A4 are connected with LEDs, A0 comes in connection with a preset; put to use the ADC functionality. A trimmer resistor is employed to control the LCD contrast. Arduino reset switch is brought out on the shied for easy accessibility. Ultimately rhydoLABZ UI shield is the super slick way to add a display without all the wiring hassle on your Arduino.
 

Features:

  • Operating Voltage: 5V
  • 5 Momentary switches for custom menu control panel
  • RST button for resetting arduino program
  • Supports OLED Display (0.96" and 1.3") , SPI interfacing
  • Supports Character LCD Module, 4bit mode
  • Trimmer resistor for varying analog input
  • Integrated preset for adjusting LCD contrast
  • On board buzzer for audio alert
  • Plug and play with any Arduino
  • Power Indication LED provided on board
  • 3 LEDs in connection with GPIO pins
  • Professionally Designed High Quality PTH PCB
  • Screw holes for ease of mounting
  • Dimensions: 81.4x53.5 (MM)
Jumper Connections:
Jumper Description
J1 Enables/Disables 'Left' Switch
J2 Enables/Disables 'Down' Switch
J3 Enables/Disables 'Select' Switch
J4 Enables/Disables 'Up' Switch
J5 Enables/Disables 'Right' Switch
J6 Enables/Disables 'LED3'
J7 Enables/Disables 'LED2'
J8 Enables/Disables 'LED1'
J9 Enables/Disables Buzzer
J10 Configures DC pin of the OLED Display
J11 Configures CS pin of the OLED Display
J12 Enables/Disables analog input on A0

Supported Displays:

Package Includes:

  • 1 x  User Interface Shield
  • 9 x  Jumpers - 2.54mm

Resources:

Sort by: Recently  /  Helpful Write review

By Aravind Nadal from N/A on February 05, 2016
I do have a 16x4 LCD module with me. Hope it works with this shield.
Was this review helpful to you?   Yes   No

By Fahad Ali from N/A on January 29, 2016
Had fun working with the shield. Cute design and flexible to use. Thanks!!!!!1
Was this review helpful to you?   Yes   No
    • Q
    • HI is this board for arduino uno can u tell me

      asked by azariah mani on April 20, 2016
    • A
    • Yes, this shield works fine on Arduino UNO

Ask a question about User Interface Shield

Report issue about the User Interface Shield



Ask a question about the User Interface Shield

Report issue about the User Interface Shield



Request price match for the User Interface Shield

Found this item with same quality and at a lower price but prefer to buy from rhydoLABZ.com?

Please submit the url of the better price you saw. We will lauch an immediate investigation and try our best to beat the price, if it proves to be the same product. We will notify you the result by email. Thanks a lot for helping us to maintain competitive prices.

User Interface Shield